NXR range - side insulation needed?

mirucaApril 18, 2013

Is insulation or heat panels needed on the NXR range needed? If so, what is that I order or need to do ... and does it require a wider than 36" space to do so?

Kitchen cabinet production on hold for 24 hours to determine if more space is needed for containing heat from the range sides.

Please help!

Thank you for reporting this comment. Undo
kam76

I am getting a RNB 36" bluestar and will have thermafoil cabinets. I am wondering the same thing. the BS doesn't have a self clean which I have heard can be particularly damaging. I have done a little research but can't seem to find the actual "heat deflecting metal" or how/where exactly to install it. Are you having any space between your range and cabinets (i.e. a spacer) I have read that you should have 3 inches on either side which is totally stressing me out because I don't have 6 inches to give up to "space".

    Bookmark   April 18, 2013 at 12:41PM
Thank you for reporting this comment. Undo
kam76

Okay I just called bluestar and they said their ranges are built for zero cabinet clearance on the sides and back you just have to make sure the range sits forward (as outlined in the installation instructions) so the oven door is in front of the doors on the cabinet because the heat vents from the front. Perhaps you can call NXR or refer to their installation manual to see what they recommend?

    Bookmark   April 18, 2013 at 1:08PM
Thank you for reporting this comment. Undo
Angie_DIY

The NXR installation manual says that 0" clearance is okay:

Here is a link that might be useful: NXR installation manual

    Bookmark   April 18, 2013 at 2:01PM
Thank you for reporting this comment. Undo
miruca

Thanks for the zero clearance information.

I have seen posts about these type ovens getting really hot - I don't know if this is a defect or somewhat standard - and whether or not I could do something to prevent damage.

    Bookmark   April 19, 2013 at 8:07AM
Thank you for reporting this comment. Undo
GardenerDev

In case anyone is reading this while considering the NXR - I'm looking at the NXR installation manual linked above, and it looks to me like it actually says it needs 2" gap on either side of the stove.

Here is a link that might be useful: NXR installation manual

    Bookmark   September 10, 2013 at 12:10AM
Thank you for reporting this comment. Undo
miruca

GardnerDev - I am still reading this. The NXR was installed zero clearance in our ktichen - haven't started using it yet though.

    Bookmark   September 10, 2013 at 2:50AM
Sign Up to comment
More Discussions
Odd Shaped Kitchen Remodel
I cross posted this in the Design Dilemma forum, but...
sdp123
Countertops for butlers pantry
We have a wall in pantry that will need countertops...
aktillery9
Shiloh vs. Diamond - Help!
We are in the process of a large remodel of our home....
jalit1013
What does this tile say to you?
I am still in the planning stages of a small, U-shaped...
kelleg69
Thoughts on tile with this granite? Aquario
I saw that one or two people on here have the granite...
kelleg69
Sponsored Products
Kuadrat Flushmount by Bover
$972.00 | Lumens
Ultimate Butcher Block - 1318
$83.98 | Hayneedle
Knoll | Bertoia Asymmetric Chaise with Seat Cushion
YLiving.com
Cavaliere-Euro 42-inch Island Mount Range Hood
Overstock.com
Bumblebee Catch All
$49.00 | Horchow
Black s: Remote Control Black Metal 72 In. 5025-01
$72.09 | Home Depot
L.E.D.-1 Mini Pendant by ET2 Lighting
$144.00 | Lumens
Knoll | Saarinen Oval Side Table
YLiving.com
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™