Anyone have a window seat/long bench with kitchen table and chairs? or another bench? where you eat in the kitchen? Looking for photos to help me figure out table and size etc. Thanks!
Mine's in process so no finished pictures. We did a lot of research. Once you find something you like then you need the details. Here are our details:
> we want seat 18" off ground - bench is 15" with 4" cushion - we're allowing 1+" of compression; We measured benches and our own chairs and what's comfortable for us -18".
> bench (seat) depth is 17" with catalog purchased bench cushions form Home Decorators that are 18" deep. We want 1" cushion over hang so that back of legs are not pressing against the wood - so that's where 17" come from. My research said that 1-1.5" of cushion overhang is good. We won't have a back cushion but a few pillows. Originally I was going with 20" total seat depth. Saving all this money on the cushions convinced me to go with 18". I will just need flatter pillows. I will try out 18" with plywood before the finished product. We're facing the bench with wood from our 150 year old painted floor that was found above our kitchen but below the floor in the room above the kitchen (lol - instead of a dropped ceiling we found a raised floor)
> bench is slightly (3 degrees) slanted back to help keep cushions in place; Will probably use Velcro too.
> back is angled 95 degrees from bench seat. This makes it 98 degrees parallel to the floor
> the bench seat overhangs the base by 3" so that heels have comfortable room (the cushion is 1" further out)
> installing two 4' "morgue" drawers for each end. Can't wait for all that space for the crock pot, rice cooker, large pots...
> If you make the benches the length of standard bench cushions, the cushions will be much cheaper. I was planning on custom cushions and just this week saw home decorators sale. These cushions will cost 25% of what I was budgeting for custom. I totally lucked out that the lengths matched up. I do need 3 cushions instead of 2 but I think it will be OK.
> table should overhang bench 4 - 5"
> DH will make our table top from old growth wood from our home. (I bought a cool table from CL and will just use the base of it) 30" wide table is typical folding table size and really tight. We'll probably go around 34" or 36" (we have a tight space and this is the "kids" table). From a website: "Table widths between 36 and 40 inches gives you about 12" in the middle of the table for dishes and dÃÂ©cor. Forty-two inch wide tables give ample room in the middle." You should have 24" width for each person minimum.
Here is a link that might be useful: dining room table design basics
Is this what you're thinking of?
I suggest you search on Houzz. I have looked at banquettes on there for months.
There was a great thread awhile ago on banquette dimensions - I did mine before seeing it, but it depends if you want comfort (that would angle the seat and back) or storage space (no storage drawers underneath)
I don't have time to look right now but if someone remembers it and finds it, it might help.
Ours is just a bench with a fold down back (so I can access the windows) - I put a pop up table in front since only 2 of us and this way it doesn't block the view.
I can post pictures but not sure ours is what you are looking to accomplish.
Here is a link that might be useful: Some nice ones in this thread
And this one is a great thread with lots of pictures and a nice diagram on designing the benches.
If you do a search in google using search terms something like "Banquettes kitchen gardenweb" you'll get lots more. : )
Here is a link that might be useful: Ode to Banquettes
This post was edited by laughable on Sat, Apr 13, 13 at 20:55
I'm trying to figure out table size and shape so you can get in and out on bench side. Need to seat 5. Not sure I will have space for end chairs on both sides?
How deep are your shelves next to your bench? Perhaps you could do a bench like 2Littlefishies and use a round 45 or 48 inch table. I really don't know, but you might get 2 or 3 on the curved bench and 2 or 3 chairs around the table. You would probably need a pedestal for easy entry to the bench.
My banquette is small (we had lower windows and decided to put seating and storage there instead of wasted space), but we had a custom round pedestal table built using a base we got from a restaurant supply company.
Here is another thread from the past with some ideas for you.
Here is a link that might be useful: Banquette
Yes, I think it was the Ode to Banquette
Lafacia - take a look at a "Boat" shaped table. I am going to post mine - but you want a "real" table and not the pop-up variety.
Mine was done by an Amish/English - not sure if you would call it a cooperative but the Amish do part of it and the English finish it off with the stain, etc.
I think the shape would work - they make a table in this shape as well. I think it was called Grand River or Grand Rapids - if you like it, I can find the info.
This is a catalog picture - I think this is actually the desk - we also bought the desk but had it sized for our house - so they will work with you to "customize" it.
Here it is - decked out for 2 for breakfast - We kept it small as the entry into the kitchen might have been problematic if we went too large. - Mostly, I want you to see the boat shape - not sure if the pictures capture it - but imagine a boat with the ends cut off - it gives a bit more room to climb into the area - but it is not too much that it is not functional.
From the other angle