Sequoia Spa: 120v to 240v

JDanWNovember 3, 2012

Hi everyone, first post here and looking for some help. I just bought a used spa that the previous owner had wired for 120v. It looks like going to 240v is a simple matter of using 240v supply.

As you can see from the picture, the cover for the electrical connections has 2 boxes printed on the outside: one says 240v-4 wires (N, L1, L2, G); second one says 120v-3 wires (N/L1,G). I have taken the cover of the controls off and see nothing that leads me to believe more needs to be done. Is it possible to be wired internally that just adding the second live wire will work? I have another picture of the internals is that helps...JDanW

Thanks for reading and helping...JDanW

Thank you for reporting this comment. Undo
just-a-pb

what does it look like inside.
And is there a wiring diagram on the inside of the cover.

    Bookmark   November 7, 2012 at 3:59PM
Thank you for reporting this comment. Undo
JDanW

Here's the inside...no diagram anywhere...

    Bookmark   November 7, 2012 at 9:49PM
Sign Up to comment
More Discussions
Regular Pool Cover or Automatic Cover?
Although our pool project is getting pricier every...
southernmum
Looking for Pool Builder recommendations in Pasadena, CA
We are starting to evaluate contractors but can't find...
julieleek
Is it safe to build a vinyl inground with pyrite in the soil?
I have been trying to find information about excavating...
jo229
changing pool filter
I AM TOLD BY MY POOL SERVICE THAT MY FILTER IS TOO...
rudnick
Cleaning pool filter
Does your pool filter look like this after it's been...
bossyvossy
© 2015 Houzz Inc. Houzz® The new way to design your home™