replastering pool

jmoockAugust 23, 2011

We are going to have our pool redone and have received a number of quotes. We live in North County Inland San Diego. I have some questions on the various options and want to see if anyone has expereience in this area.

1. 2 companies want to chip away the old plaster and one wants to plaster over it. The pool is probably 20 or so years old and has never been redone. Any opinions?

2. For finishes we are looking at the following products:

Wet Edge Altima Premium Pool Finish

Ultra-Poz Premium Finish

ColorScapes Quartz

We aren't looking at a dark bottoom pool so it would probably be white with blue specs throughout.

My wife teaches swimming so we don't want anything rough or that will get too rough quickly.

If you have any experience with these products positive or negative please let me know!

Thank you in advance.

Thank you for reporting this comment. Undo
golfgeek

jmoock,
The replaster failure rate for chip-outs is near 0%. The failure rate for bonded replaster is probably closer to 8% based on my experience with both. I like the chip-out but it is more pricey.
You will probably be happy with any of the finishes you listed. I like the quartz, which I am most familiar with.
Good luck.

    Bookmark   August 23, 2011 at 1:39PM
Sign Up to comment
More Discussions
Diaphragm in Barracuda cleaners keeps getting torn
We have second home in FL with pool built in late 70s'==like...
loves2read
Looking for Pool Builder recommendations in Pasadena, CA
We are starting to evaluate contractors but can't find...
julieleek
salt or chlorine? pebble or plaster?
We have finally decided to build a pool, and have had...
lostinthewoodlands
Spa motor capacitor
My spa is wired for 220v. The pump motor is rated for...
pugmark
Pool heater shutting off after 90 degrees F.
Hello! I have a pentair minimax 200M for my pool spa/combo....
tcornell05
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™