New Pool Build in Oklahoma

SpeisFamilyJuly 4, 2012

So we are finally ready to put a pool in. I will try to post pics weekly on this thread of the progress. We had a few obstacles to overcome. Our yard is fairly narrow (27ft x 60ft). We also have a 3.5ft down grade. We have a 10ft easement on the back and 5ft on the sides and near windows. We have chosen to go with Pristine Pools as they were the most knowledgeable and professional. We actually went and looked at one of the pools they just completed (my co-worker) which was close to the same size we have chosen. We were very impressed not only with the work but with the satisfaction of the customer.

13ftx31ft gunite pool with 6ftx5ft spa with spillover

3ft in the shallow end and 6.5ft in the deep

18in Raised Bond Beam on front

24in Reverse Bond Beam Wall on backside

Jandy equipment

2 hp motor

4 cartridge filter

200,000 btu heater

Ozone system

4 returns

Cool deck

Oklahoma flagstone coping

We will begin in roughly 2 weeks. PB estimates build was only take five weeks from start to finish. Any advice would be greatly appreciated. We are a little worried this will be too small. We have a family of 4 but would like to hold pool parties as well. We thought we had enough room to do 14ft wide pool but PB said (after we told him price we needed to stay close to) that the 10ft easement was from fence to waters wall not waters edge? Not sure, as I know every city is different. Thanks guys for any suggestions you might have.

Thank you for reporting this comment. Undo
SpeisFamily

The rendering the PB did at the house.

    Bookmark   July 4, 2012 at 8:02PM
Thank you for reporting this comment. Undo
brentr_gw

IMHO You will be fine. We have a 10 x 20ft pool and we have parties all the time. Check this out, 27 people enjoying our pool.

    Bookmark   July 5, 2012 at 5:06AM
Thank you for reporting this comment. Undo
SpeisFamily

Oh wow, it will be larger than I imagined. Looks like a great pool party!

    Bookmark   July 7, 2012 at 10:36PM
Sign Up to comment
More Discussions
Need new pool filter help
I don' t mind spending the money for a good pool pump...
echooooo
Pool heater shutting off after 90 degrees F.
Hello! I have a pentair minimax 200M for my pool spa/combo....
tcornell05
New Pool in Louisiana
Wanted to share a few pictures of our new pool. It...
trhought
Plaster mottling???
It's been 13 days since we had the pool replastered....
lisadlu
Pool Filter Question
Should my pool filter run 24/7 or less than that? I...
JeremyLin
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™