Valve Actuators

tonys_2009July 29, 2011

I have a question about my Jandy valve actuators. I know there is a way to disable the motor and manually move the valves. The manual says to unscrew the locking knob and then push down. I've never been able to get this to work. Is there a trick to it?

Thank you for reporting this comment. Undo
poolguynj

IIRC, unscrew the locking knob almost all the way up and push it down, not the handle. Its a fairly strong spring so be careful not to push unevenly or the plastic threaded part will snap.

Scott

    Bookmark   July 30, 2011 at 5:24AM
Sign Up to comment
More Discussions
Resurfacing a Pool
We are looking to resurface our pool. Can you give...
rhondasumsky
Atlantis pool and spa (Magnolia Tx) anyone have any feedback?
Searching for a pool builder and looks like Atlantis...
makingbeacon
My pebble sheen finish is so uneven...
Our pebble sheen finish was completed on January 1st...
Susan Scearce
Automatic Pool Covers for Inground Swimming Pool
We are looking to purchase an automatic pool cover....
Christy Bell
New Pool Build in Cypress near Houston
Well, the Big Dig did not begin Monday. Our PB stopped...
suzfromtexas
Sponsored Products
Titan Lighting Wall Mounted Maryville 27 in. Outdoor Washed Pewter Gas Wall
Home Depot
Danze Amalfi Two Handle Centerset Lavatory Faucet - Brushed Nickel
Modern Bathroom
Bellows Foot Pump
$19.50 | FRONTGATE
Graff - Canterbury/Nantucket Transfer Valve Trim Plate-G-8061-C2S-OB-T
$187.50 | PlumbTile
Fontaine Montbeliard Oil Rubbed Bronze Widespread Bathroom Faucet
Overstock.com
American Standard Toilets Champion 4 HET Right Height 2-piece 1.28 GPF
Home Depot
Danze Bannockburn Trim Only Single Handle Tub & Shower Faucet - Oil Rubbed Bronz
Modern Bathroom
Oil Rubbed Bronze Whitehaus 614.835PR Shower Set with Valve Tub Filler
$399.00 | Blue Bath
© 2015 Houzz Inc. Houzz® The new way to design your home™