Slab door cabinets owners - please show me your pulls or knobs?

thedorkMarch 25, 2013

Thank you!

Thank you for reporting this comment. Undo
dljmth

Looking for ideas too!! Here is a picture of the cabinets. Rift cut oak with a black/grey wash. They are smooth as silk. Can't figure out a pull that would work. Ideas?
Thanks!!

    Bookmark   March 25, 2013 at 11:20PM
Thank you for reporting this comment. Undo
karin_mt

LauraT, that looks like an incredible space. All those windows, wow! That is going to be spectacular.

Here's our slab doors in Baltic birch with Amerock Princetonian pulls.

    Bookmark   March 26, 2013 at 12:07AM
Thank you for reporting this comment. Undo
karen_belle

Here are our maple cabs with Ikea pulls.

This post was edited by karen_belle on Tue, Mar 26, 13 at 12:12

    Bookmark   March 26, 2013 at 12:08PM
Thank you for reporting this comment. Undo
cat_mom

This picture shows almost all of our cabs/drawers/handles. We used the middle size (~8-8.5"?) on most of the cabs/drawers. We used the smallest size (~5") on the 12" wide drawer to the left of the range, and the largest size (12") on the DW, trash cab, and over-the-fridge cab door.

    Bookmark   March 26, 2013 at 12:09PM
Thank you for reporting this comment. Undo
modern_mom35

kind of a far-away pic, but you get the idea. we went with the standard, stainless steel bar pulls.

    Bookmark   March 26, 2013 at 3:33PM
Thank you for reporting this comment. Undo
thedork

Cat_mom: what is the wood and stain on your cabinets? Thank you!

All are beautiful kitchens! Thanks for sharing!

I am still stuck on the wood and stain of the cabinets - want not too modern and not too woody, grainy more sleek look of the wood - not sure if cherry is my best bet. I don't want too dark, not too light since my floors are golden oak hardwood floor and I need some contrast.

    Bookmark   March 27, 2013 at 3:38PM
Thank you for reporting this comment. Undo
jakabedy

My hardware and cabinets are from IKEA.Your cabinets are are gorgeous. I think I would be tempted to show them off with just very simple tab-type pulls.

Here is a link that might be useful: Tab pulls something like this. . .

    Bookmark   March 27, 2013 at 4:52PM
Thank you for reporting this comment. Undo
dljmth

I was thinking of those but they require the cabinet maker to route the drawers @ $10 each. That's about $400 not including the hardware. Yes, yes, in the grand scheme of costs it's not that bad but I am up to about 10 of those, "it's only an extra $300" things in our 1500sqft remodel. It adds up. But then again, I do hear that people's biggest regret is not spending the extra $ to get it right. :)

The cabinets did come out more beautifully than I ever anticipated so why scar them ?

    Bookmark   March 27, 2013 at 5:38PM
Thank you for reporting this comment. Undo
remodelfla

Here's mine:

    Bookmark   March 27, 2013 at 7:31PM
Thank you for reporting this comment. Undo
cat_mom

thedork, cabs are cherry (veneer) stained with a quarter-cut or 25% Harvest Gold stain (basically watered down stain). The cabs looked "naked" (natural) when they were delivered, but the stain helps to "control" (even out?) the naturally occurring ambering, or darkening of the cherry.

    Bookmark   March 27, 2013 at 9:08PM
Thank you for reporting this comment. Undo
clg7067

I don't have photos, but I use these.

Here is a link that might be useful: pulls

    Bookmark   March 28, 2013 at 3:13PM
Sign Up to comment
More Discussions
Doing a little happy dance!!
Two weeks from tonight, we should be moving in. We...
swhite10
Did they sell me a bad piece of soapstone?
Hello soapstone owners: I paid $1,400 (including installation)...
leavemeout
KitchenAid Mixer - Sea glass or azure blue
I'm having a tough time deciding between the Sea glass...
sillyk
WWYD with this area?
This area was designated as "dog cubbie"...
debrak_2008
Closet pantry or not?
I am doing a reno of our kitchen and wanted to get...
abbabug
© 2015 Houzz Inc. Houzz® The new way to design your home™