Solar schedule in EasyTouch

guitargeak99June 24, 2011

This year I cannot get the Solar schedule to work correctly. I have an Intellipro 4 speed pump with an EasyTouch wireless. The solar has been set-up on the Pool mode on the #4 speed. I set the times for the Pool schedule,set the desired temp, it starts, when the pool gets to the set temp, the Solar valve closes, and the pool pump drops down to the #1 low rpm speed until the end time of that schedule. During the schedule if the temp drops, the solar valve will open back up and the pump will ramp up to the higher #4 rpm.

Now this year after re-enabling the Solar I cannot get the pump to ramp down once the pool gets to the desired temp. The Solar valve will close, but the pump keeps running at the higher #4 rpm instead of ramping down to the lower rpm.

Sign Up to comment
More Discussions
Plaster mottling???
It's been 13 days since we had the pool replastered....
lisadlu
Forty year facelift: OKC pool renovation
Hi everyone! I've been chronicling our pool renovation...
MiaOKC
Baffled by my pool- peeling skim coat?
Hi all! My in ground concrete pool is leaking... I...
sabine77
Looking for Pool Builder recommendations in Pasadena, CA
We are starting to evaluate contractors but can't find...
julieleek
pool filter leak; newbies buying the house
We have a contract on a house with a pool. The pool...
defgarden
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™