Pentair Minimax NT 200

fabianjdJune 5, 2012

Have a 7 year old Minimax NT 200. Have a couple issues. First was no power on secondary side of transformer. replaced transformer. Second problem was ERR code on display. Replaced thermister. Now display shows water temp and other lights.

Last problem is the heater won't fire. Have a code E04. Replaced air pressure switch, and igniter. The igniter had an ohm reading of 11,125 ohms.

Blower runs, can hear a solenoid click, I assume this is the gas valve. I do not smell any gas

Any ideas?

Thank you for reporting this comment. Undo

The fan error code you gave might be better asked on the link below...

Here is a link that might be useful: Pentair

    Bookmark   June 6, 2012 at 8:20PM
Sign Up to comment
More Discussions
Pool Filter Question
Should my pool filter run 24/7 or less than that? I...
should pool building take this long??
I signed a contract July 19th with Mr. Carlos pools....
Is it safe to build a vinyl inground with pyrite in the soil?
I have been trying to find information about excavating...
Regular Pool Cover or Automatic Cover?
Although our pool project is getting pricier every...
Looking for advice on indoor pool filter and pump
Hi, I've spent time reading over the archives, but...
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™