Timbertech Earthwood Deck Pictures

centraljerseyguySeptember 11, 2007

Hey folks,

This is my first attempt at posting photos so hopefully it works.

We used TimberTech Earthwood in Teak color and installed it with the TimberTech hidden fasteners.

Here is a link that might be useful:

Thank you for reporting this comment. Undo
centraljerseyguy

OK here goes another try.

Here is a link that might be useful:

    Bookmark   September 11, 2007 at 1:25PM
Thank you for reporting this comment. Undo
centraljerseyguy

OK, since I cannot embed the photos I will try just posting a link here and hope it works.

http://picasaweb.google.com/CentralJerseyGuy/DeckPhotos

Here is a link that might be useful: Deck Photos

    Bookmark   September 11, 2007 at 2:48PM
Thank you for reporting this comment. Undo
graciesmom284

WOW! absolutely fabulous! did you build it yourself? What railings/posts are those and in what color? how did you attach the fascia board without seeing any screws? I want your deck!!! sorry for all the questions!!! where in central jersey are you? we are in flemington...

    Bookmark   September 11, 2007 at 3:53PM
Thank you for reporting this comment. Undo
centraljerseyguy

A family member who is a contractor did the bulk with reasonable contribution from me.

The railings are TimberTech Radiance in White. The deck is Earthwood in Teak color. The columns are HB&G Permacast Columns (we have to paint these to match the Radiance posts and rails. Ordered everything from Home Depot. Word of advice, do not order pressure treated lumber form Home Depot. The width of many pieces were not consistent. If you buy 2X10s of varying lengths some will be 9 1/4" while others may be as much as 9 3/8 etc... Added a great deal of time trying to get everything level.

As far as the facia board there are screws, perhaps the image is not zoomed enough to notice. For the deck boards we used the hidden fasteners. I am in Marlboro township.

    Bookmark   September 11, 2007 at 4:58PM
Thank you for reporting this comment. Undo
ekoreilly

Sharp looking deck, you have good taste! I'd like to see more pictures posted as you progress and finsh. How much do you think it would have cost JUST to do the overhang roof?

    Bookmark   September 14, 2007 at 12:14PM
Thank you for reporting this comment. Undo
deckman22

Good looking deck jerseyguy, you all did a fine job.

On a side note, all 2x10's vary in size, ie; 9 1/4" to 9 1/2" not just HD's. That's why if I have beams carrying the joist I don't install them til after joist are up, then shim the shorter ones that don't rest on the beam. Much faster doing it that way.

Al

    Bookmark   September 16, 2007 at 11:10AM
Thank you for reporting this comment. Undo
jcrowley99

Fabulous deck!!! I am just looking into getting estimates to get a deck built. I wanted a deck with a gazebo for shade, but this is even better! And I love the color, I will have to see if Timbertech Earthwood is available in our area. I have not seen it, but I have not looked many places yet, and most composites are special order.

    Bookmark   September 16, 2007 at 9:57PM
Thank you for reporting this comment. Undo
centraljerseyguy

The TimberTech Earthwood is available through Home Depot as a special order product. Also, due to the size of the order they shaved 10% off the total cost making their quote more competitive than some of the other local lumber yards that carry Timbertech. I ordered from Home Depot because I thought if I ran into any problems they would stand behind the product they sold me.

At some point I have to go over the receipts to figure what it ultimately ended up costing me. However, it is still not done yet so the cost continues to climb. I just ordered Azek beadboard & trim for the ceilings and to wrap the beams stick to the maintenance free nature of this project.

All of this composite/PVC stuff is a lot more costly than wood. I can't wait till it is done. I still need to install lighting, fans, gutters, soffits etc. So it is a slow go just working on the weekends.

    Bookmark   September 21, 2007 at 11:44AM
Thank you for reporting this comment. Undo
graciesmom284

http://i54.photobucket.com/albums/g94/gracie01mom/timbertechdeck.jpg
here is a photo of our timbertech earthwood teak,,finally!

    Bookmark   January 11, 2008 at 11:36PM
Thank you for reporting this comment. Undo
john_hyatt

John agrees with Al all framing lumber is mis milled and has been all the while I have been in the Business. One thing,at least around here, the box stores sell above ground contact pt material .25 not the high grade ground contact .40

TemberTech got it right with the earthwood series everyone seems to like it including my Wallets. As with all composites the fade factor is still there. Also the pre-groved/clip system looks pretty good. The clips alltogether have been a real mess in the past but the nature of the system TT is selling looks pretty good Im about to try it and I know several Contractors who already have with good results. John

    Bookmark   January 12, 2008 at 10:14AM
Thank you for reporting this comment. Undo
deckman22

I'm working on my first TT earthwood deck. I still passed on using the clips tho. Pre-drill then screw in the Headcoats. SS post with SS cable for rails. Very pricey deck, but will be extra nice. Thumbs up on the TT earthwood. John, let us know how the clips work out.

Al

    Bookmark   January 12, 2008 at 11:24PM
Thank you for reporting this comment. Undo
centraljerseyguy

Hey folks,

I am not sure if I posted these before but here it goes. I completed this Timbertech deck and overhead last summer. So far very happy. To date the only thing that went wrong is the facia on the deck opened up from freezing water over the winter. I had to remove and reinstall with more screws.

The objective was to have this be a totally maintenance free deck. Other than having to paint the fiberglass columns on the overhead nothing else requires maintenance.

Here is a link that might be useful: Photos of completed Timbertech Deck and overhead

    Bookmark   May 27, 2009 at 10:20AM
Thank you for reporting this comment. Undo
lazygirl78

Centraljerseyguy, how is your deck doing now? Still happy with the TimberTech? I'm thinking hard about the Earthwood line (and your beautiful deck is a big reason why), but (as I just posted in a new thread) I'm worried about the durability of the "coating" as compared to some other composites that are of uniform composition. I've seen a lot of TimberTech decks on this site, but I haven't seen a lot of followup. Hoping to get some updates from you and others. Thanks!

    Bookmark   April 12, 2011 at 10:37PM
Sign Up to comment
More Discussions
porch ceiling insulation?
We added an enclosed porch with metal roof, no plywood....
ohiojudy
Any experience with aluminum decking?
We're considering one of the watertight aluminum decking...
dmnmnky
2nd floor covered porch questions.
1) What is the proper technique and layers for a porch...
Molly Dunning
Buckling Deck and Hidden Fasteners
I've got a deck that has expanded to the point of buckling....
ruben_d
new aluminum decking install 2014
We have an elevated 570sqft deck about 10ft above grade....
k_rider
Sponsored Products
Remer by Nameeks Q11US Single Hole Bathroom Faucet - REMER Q11US
$349.92 | Hayneedle
STERLING Jetted Bathtubs Ensemble 5 ft. Whirlpool Tub in White 76131100-0
Home Depot
Brushed Nickel Whitehaus 514.463TF Blairhaus Deck Tub Filler Shower Head
$439.00 | Blue Bath
White Orchid 4" x 6" Photo Frame
$100.00 | Horchow
Montego Bay 3-piece Bar and Two Stools Set
Overstock.com
Sherry Kline Paris with Love Bath Accessory 2-piece Set
Overstock.com
Pink & White Ribbon Picture Frame
$22.99 | zulily
Chloe Lighting Outdoor Lighting. Transitional Wall-Mount 1-Light Outdoor Oil Rub
$77.50 | Home Depot
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™