Easy Touch 4 remote newbie question...

nlionMay 6, 2011

We just had the Easy Touch 4 installed. We only have a pool, no spa. In reading the manual, I don't see the answer to this (very basic) question. In looking at the pool temp, the remote displays two temps, for instance 79/81 degrees. What is the first temp and the second temp referring to? Thanks!

Thank you for reporting this comment. Undo
nlion

Another basic question...the N (narrow) and the W (wide) setting...it's factory preset to wide. Can we stand in front of the light and hold the lens and twist it to have the N at 12 o'clock? I really hope this is the case! Again, thanks!

    Bookmark   May 6, 2011 at 10:44PM
Thank you for reporting this comment. Undo
kspoolman

The first temperature is the current temperature of the pool.
The second is what the pool is set to heat to.
So your pool is currently 79 degrees and is set to heat to 81 degrees.
If you dont have a heater, or dont have the heat "enabled" (under menu>heat>pool), then it doesnt really matter what that second number is.

    Bookmark   May 7, 2011 at 10:41PM
Thank you for reporting this comment. Undo
nlion

Thanks for the response...we do not have a heater, so I'll just pay attention to that first number from now on. Again, thank you!

    Bookmark   May 8, 2011 at 10:52AM
Thank you for reporting this comment. Undo
racket

I don't understand why it doesn't remove the second number when the heater is off.

It's a good product, but little things like this prevent it from being great.

    Bookmark   May 8, 2011 at 1:14PM
Sign Up to comment
More Discussions
Pool builder search sugar land, tx
Hi guys! Were closing on our brand new home in sugar...
mtrade01
Please recommend a good pool builder in Southern California?
Hello, We have had a hard time finding a trust worthy...
dpautz
Our Pool Remodel with Mr. Carlos Pools
So after much searching and many quotes from diffirent...
evepineda02
Basement pool - How to prepare the room?
With some slight modifications to my garage (dropping...
Alex House
Plaster mottling???
It's been 13 days since we had the pool replastered....
lisadlu
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™