aqau-rite

scojonMarch 30, 2010

I have an Aquarite SG that is 3yrs old. None of the lights on the board come on but there is a salt reading of 3000 and the diagnostics work. I ran it through the diagnostics with the factory 800 number and they told me it was a problem with the board. After searching the web and this site I saw that there were issues with Aqua logic by Goldline with solder issues and would like to know if this could possibly be my problem. Thanks Scott

Thank you for reporting this comment. Undo
poolguynj

See this site and see if it matches.

Scott

Here is a link that might be useful: No Cell Power

    Bookmark   March 30, 2010 at 10:27PM
Thank you for reporting this comment. Undo
jern_a5_hotmail_com

I have this problem too. I am the user from Thailand. The light does not work. The thailand distributor said i need to buy a new board. The warranty only cover a year. Mine is just over only 1 year old. I've ask if they could provide warranty for new board they said they can not because howard the distributor does not do it.

    Bookmark   June 13, 2011 at 5:06AM
Thank you for reporting this comment. Undo
muddy_water

Check both fuses on the board first

    Bookmark   June 13, 2011 at 6:07AM
Sign Up to comment
More Discussions
salt or chlorine? pebble or plaster?
We have finally decided to build a pool, and have had...
lostinthewoodlands
Pool heater shutting off after 90 degrees F.
Hello! I have a pentair minimax 200M for my pool spa/combo....
tcornell05
Diaphragm in Barracuda cleaners keeps getting torn
We have second home in FL with pool built in late 70s'==like...
loves2read
Looking for advice on indoor pool filter and pump
Hi, I've spent time reading over the archives, but...
gwgjr33
Concerns about quartzscape plaster on new build
Yea, our newly constructed pool was plastered with...
spicegal
© 2015 Houzz Inc. Houzz® The new way to design your home™