need help urgently with wall mount water filter faucet

raroJune 28, 2011

We got the fancy shmancy Kohler Karbon faucet for our kitchen and it will be wall-mounted to the stainless steel backsplash of the integral stainless steel sink and countertop. I have been searching high and low for a wall mounted water filter faucet and the best that I have found had been from Chicago Faucets or T&S Brass. The stainless steel fabricator needs the specifications ASAP and I am still struggling with figuring it out.

Here is what I found so far:

goose neck 933-WSCP

Wall Mounted - Single Hole 332-CP

there is a 5" ledge at the back edge of the sink. Presumably the faucet spigot would have to clear that.

Any other suggestions?

I am worried that this will be too big and will compete visually with the Karbon.

Please help!! (I will cross post on the kitchen site.

Thank you for reporting this comment. Undo

Why aren't you plumbing your kitchen faucet to use filtered water instead of using a separate unit? A simple under cabinet filtration system would work just fine in line to your Karbon.

    Bookmark   July 3, 2011 at 2:22PM
Sign Up to comment
More Discussions
Am I the only one bothered by this?
Since Houzz took over, these forums have become a spam-infested...
Yes or No to Easy Water (no-salt) water softener?
I started this thread to reply to Sam because the prior...
Warm water mornings on cold line for 30 secs....
We have been living in a home built in 2011 (in Canada)...
New under mount sink - drain off-center?
I had a new granite countertop installed with an under...
38 ga. tank - not getting 2 hot showers?
We have just finished a renovation project that included...
© 2015 Houzz Inc. Houzz® The new way to design your home™