Reverse Osmosis System Problems
I just bought a GE GXRM10RBL Reverse Osmosis System. I followed the instructions hooking it up. It said I needed to sanitize the system by taking out the filters and the membrane and adding water and 2 oz. of bleach. I did that and ran it like they instructed me to. Everything worked fine. I then put the filters and the membrane in and turned the water back on. I heard it start to fill. I saw water going through the drain tube but nothing will come out of the faucet now. I did hear the air rush out of the faucet, but no water. I took it apart to see if it was clogged. The prefilter was filled completely. The postfileter was half filled and the membrane had water in it. I do not think that any water is in the tank. It says I need to let the system fill up which could take up to four hours. When I called their help line they told me I should get water to the faucet immediately. What could be wrong? I made sure all the filters were in place correctly and the lines werent kinked or leaking. Any other advice? Or does it just need to fill up before water gets the faucet?