Corrugated dishwasher drain

southland76March 18, 2014

I had to purchase a 12' drain hose. The one I got is corrugated, and instead of having an elbow on the connecting end to the dishwasher this one has a straight connector. Therefore the flex plastic hose makes a sharp 90. This is the gray hose with white ribs when bent. The white is exposed to the bend.
Does this sound like it is ok? I don't want a leak!

Thank you for reporting this comment. Undo

I wouldn't use it. The corrugations will cause restricted flow.

    Bookmark   March 19, 2014 at 5:00PM
Thank you for reporting this comment. Undo

Tight-90 with ANY hose is bad news...more so in a hidden location like under or in back of a DW. You NEEEEED a molded or rigid elbow to make this work safely and dependably.

    Bookmark   March 20, 2014 at 9:11PM
Sign Up to comment
More Discussions
Fed up and ready to tackle my well water issues
I've been reading posts trying to educate myself for...
Details of a new residential water service
I'm in the planning stages of replacement for my 55...
Mansfield Toilet #35 Hard to Flush
So I have the joy of having inherited a 1980s Mansfield...
Drain assembly help
I need some help on hooking up the drain on my new...
Any experience with Riobel?
I have been searching high and low for a floor mounted...
Sponsored Products
Replacement Filter for 36" Fente Series Stainless Steel Under-Cabinet Range Hood
Signature Hardware
Round 17"Under Counter Copper
Redi Trench Shower Bases 36 in. x 63 in. Barrier Free Shower Pan in Black
Home Depot
Lime Green Slotted Turner
$12.99 | zulily
12-Piece Pompeii Dinnerware Service
$429.90 | Horchow
73" Granite Vanity Top for Double Vessel Sinks
Signature Hardware
Cake Dome & Pedestal - MOCHA
$265.00 | Horchow
Duravit | Vero Wall-Mounted Washbasin With Two Faucet Holes
$633.75 | YBath
© 2015 Houzz Inc. Houzz® The new way to design your home™