shower stall pan size problems

psujoeFebruary 28, 2012

old house. as you face shower, width 35 1/2 and depth 42.

Pans available come 42 x 35 1/5 the finished/front on the 42. I need the finished on the 35 1/2.

some say that a pan will have to be built and cost looks like 600-800. I don't need a pan that can be tiled a fiberglass white is fine.


Thank you for reporting this comment. Undo

You might have better luck on the bathrooms forum - the folks over there are more in tune with available bathroom components.

    Bookmark   March 1, 2012 at 9:34AM
Thank you for reporting this comment. Undo

I think this is what you need.

I've used several shower pans from these guys; fiberglass and terrazzo. They make good products and they seem to have the right one for every remodel situation.

Here is a link that might be useful: check out Model 3642-1

    Bookmark   March 2, 2012 at 11:05AM
Thank you for reporting this comment. Undo

aidan m, thanks for the website reference. I think you understand the size issue. Found a plumbing place here that can order a Swanstone in the size we need.

thanks again

    Bookmark   March 3, 2012 at 12:46PM
Sign Up to comment
More Discussions
Yes or No to Easy Water (no-salt) water softener?
I started this thread to reply to Sam because the prior...
Grohe Ladylux Cafe Touch Faucet
Does anyone have this faucet, and if so, do you like...
New under mount sink - drain off-center?
I had a new granite countertop installed with an under...
Pulldown sprayer leaking
My Moen pulldown faucet (with Reflex Technology!) was...
Warm water mornings on cold line for 30 secs....
We have been living in a home built in 2011 (in Canada)...
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™