Oil/latex on paneling

zuponcicJuly 28, 2014

I have a room with good pine paneling that was painted originally with oil. Later, a painter (working when I wasn't home) put on latex, which is peeling in spots. I'm going to repaint myself, and want to know how much prep to do--obviously, it would be impossible to remove the latex on top. If I wash and sand lightly, board by board, then prime with whatever seems the best, will that do it? Please give me a suggestion for the primer. BINS? Thank you! I'm planning on using BM oil Impervo.

Thank you for reporting this comment. Undo
PRO
Brushworks Spectacular Finishes

Peeling in spots? Over knots in the wood??

Is the sheen gloss or eggshell?

At this point, primer won't cure the problem.

If the sheen is satin or less, wash well with Dirtex and skip the sanding. Feather sand the peeled areas, level with spackle and sand smooth, then prime with the paint.

Apply two full coats of acrylic enamel.

    Bookmark   July 30, 2014 at 7:18AM
Thank you for reporting this comment. Undo
zuponcic

Yes, peeling in spots, but not necessarily over the knots. It is quite clear...not too many knots in any case. The latex layer is eggshell.

Okay, Dirtex it is....thank you for your help!

    Bookmark   July 30, 2014 at 7:05PM
Sign Up to comment
More Discussions
Spraying SW Primer and wb Paint with Airless - tip size?
I've read hundreds of posts and found 3 that address...
cebury
Paint colors
Our 1905 colonial home has original cherry and oak...
CocoaBean1
What color wall paint to go with Blooming Prairie Quilt?
Here is photo of daybed with the set I just purchased....
hyperchickmom
Mixing your own paint colors
Decided I want to do this bc I can't find exactly what...
kashka_kat
Advice on what to expect with exterior house painting job
I plan on getting estimates from 3 painters to paint...
spunkybelle
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™