pine bleeding through

hogan_njJune 17, 2010

I painted a new fence panel I made from pine. I used bullseye to prime it then a good quality ($50 a gallon) Ben Morre exterior acrylic paint. It sat in the basement for a few days after I assembled and painted.

I mounted the fence on sat. june 12 and today I noticed some sap bleed through the knots of the wood.

What should I do,I think if i give it another coat it will happen again. Besides the primer,it has 2 coats of paint.

Thank you for reporting this comment. Undo

You need to use BIN for this type of stain. Latex primers will not work for knots.

    Bookmark   June 18, 2010 at 1:38AM
Thank you for reporting this comment. Undo

So now what? Do I have to remove the paint down to bare wood and use BIN then repaint? What would I use to remove the 2 coats of paint?

    Bookmark   June 18, 2010 at 11:57AM
Thank you for reporting this comment. Undo

There is no need to go back down to raw wood. Just use the BIN over the knots and the paint now.

    Bookmark   June 18, 2010 at 7:37PM
Thank you for reporting this comment. Undo

Thank you

    Bookmark   June 19, 2010 at 1:01PM
Thank you for reporting this comment. Undo

Try a primer for Porter Paints. Go down and talk to them. I have a cypress fence I had to prime/paint. They hooked me and not bleeding.

    Bookmark   August 16, 2010 at 12:21AM
Sign Up to comment
More Discussions
how to get smooooth walls
The room Im painting has some areas original 1906 calcimine...
First Time Homeowner - Interior Paint Decision ProMar/SuperPaint/Aura?
Here we go... I just purchased a 1950s midcentury modern...
Front door color for my gray house!
Hey everyone, I need help choosing a front door color....
What color yellow for cottage exterior
I'm painting my cottage this spring. I want to use...
Ann Guss
Help me find this wall paper please
Hi all. I'm new to the forum and excited to be here....
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™