Zinsser Cover Stain

KimbahApril 11, 2011

Hi again,

I used Zinsser Cover stain to prime my kitchen cabinets. The first coat went on fine but when doing the 2nd coat it feels like the brush is pulling or dragging.

Does anyone know why this is? Could I not need a second coat? I'm waiting 24 hours between coats due to the primer being oil based and life in general, using purty brushes and sanding between the coats. Could I switch to another primer for the second coat such as BM fresh start?

Thanks for any help!

Thank you for reporting this comment. Undo

One coat of primer is fine, as long as it is a full coat.

    Bookmark   April 12, 2011 at 8:01AM
Sign Up to comment
More Discussions
How to move forward and paint after large scale patching and sanding
We have plaster walls and ceilings. I removed the...
Spraying SW Primer and wb Paint with Airless - tip size?
I've read hundreds of posts and found 3 that address...
Thought I was spending good money...NOT!
When remodeling one section of our house, I re painted...
paint matching from sw to valspar
has anyone had a can of paint matched in another paint...
Paint not cured-it's been over a month!
I recently painted an unfinished wooden bench. I did...
Phobie Privett
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™