Question about spraying Glass patio doors

dhustonApril 3, 2012

Going to spray my glass patio doors in the next couple of days and I have some questions. The doors are full lite glass and have some screw hole covers/plugs that go into the molding. The molding is white and we are painting the doors white also. My question is would you advise that we spray the molding also or just spray the door. Also we used BM satin impervo waterborne off the shelf white for all the interior doors, what you recommend for the exterior doors?

Thank you for reporting this comment. Undo

Moorguard Soft Gloss exterior for the exterior of the doors. We usually do paint the plastic trim after plugging the holes because that plastic ends up changing colors down the road.

    Bookmark   April 3, 2012 at 7:33PM
Thank you for reporting this comment. Undo

Just make sure you're not blocking any weep holes.

    Bookmark   April 8, 2012 at 7:15PM
Sign Up to comment
More Discussions
What color yellow for cottage exterior
I'm painting my cottage this spring. I want to use...
Ann Guss
why does the cut in on walls look darker than the rolled walls?
Im a designer and the painter I use tells me this happens...
Michael Taylor Interiors
Mixing Paints & Colors
I know I shouldnt do it but I always do - mix paint...
Paint pink ground
what is the equivalent of pink ground by Farrow and...
Can regular paint go over Cabinet Coat?
I have an orange oak vanity cabinet I just pulled out...
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™