Best paint color for black doors? going off kswl's thread....

lkplatowFebruary 24, 2012

I didn't want to hijack kswl's thread, but I have a couple black-door questions. I've been planning for quite some time now to paint the insides of my main entry doors black. But I've been holding off because I'm afraid that straight-up black will be too harsh and stark against the all white trim and lighter walls (I painted my stair bannister an off-the-shelf rustoleum black a year or two ago and hated it - I ended up stripping it all off and restaining). I have several brownish-blacks that I've used throughout my home and I was going to use one of those, but they're really more brown than black and I don't want "brown doors", LOL. So I've been trapped in analysis paralysis and my poor doors still sit unpainted.

So I've got a couple questions:

1) if you painted your doors black, what paint color did you use? Was it a true black or an "off-black"? If an "off-black" - what direction off was it (I appreciated that kswl shared that hers was a bit greenish.)

2) What paint brand/gloss level did you use? Is it holding up? Did you prime first, and if so, what brand of primer and did you tint it? I ask because the one door has taken quite a bit of abuse from my dogs jumping up against it to look out the half-glass at the top - I'm afraid that if I paint it black and it doesn't hold up, the scratches are going to be super-noticeable since the door will be so much darker (it's currently white). So I'd like the toughest paint possible. Current paint is oil, but I haven't had problems going over it with latex if I properly sand and prime.

Thanks so much!

Thank you for reporting this comment. Undo
riff3

I like a true black - SW Tricorn. In satin for inside doors, semi gloss for outside doors. If already painted, I don't prime first. Yes it will show scratches, but it doesn't show prints/scuffs as easily as white - it is a trade off.

    Bookmark   February 24, 2012 at 9:25AM
Thank you for reporting this comment. Undo
mdrive

count me as another who is going to paint the front door black....

currently my door is a dark red, and the interior side is white....

i like the idea using semi-gloss on the outside, and satin on the inside, riff...

i wonder if it would help at all to paint the door with a dark tinted primer first (especially on the interior) where the 'base coat' would be white and would obviously show scratches more, no dogs or small children at home, so scratches aren't a huge problem, but i would sure like to minimize the potential

    Bookmark   February 24, 2012 at 9:31AM
Thank you for reporting this comment. Undo
PRO
Lori A. Sawaya

Diamond Vogel has a product called CoteAll, Comes in "black" and semi and hi gloss. If you don't have a store near you, they will ship from their Orange City, Iowa plant/location.

Diamond Vogel is a paint manufacturer with stores. They have have a Dutch pedigree just like Fine Paints of Europe.

But, DV is a heck of a lot cheaper. A gallon of CoteAll is only $51.

Here is a link that might be useful: Diamond Vogel

    Bookmark   February 24, 2012 at 10:05AM
Thank you for reporting this comment. Undo
rmkitchen

For the exterior and interior of our front door / sidelights we used BM oil-based Impervo Alkyd High Gloss, in off-the-shelf black (I also used it on the vanity in our powder room). For our interior doors I used BM Impervex Latex High Gloss Metal and Wood, again in off-the-shelf black (so water-based).

I used the latex on that later go-round because I find oil clean-up a drag, but truthfully I think the oil is more durable. I have thus far (and it's been four+ years on the front door / sidelights, two years for the vanity, and about one year for the water-based interior doors) had no problems with any of the surfaces. I do not have a dog which scratches at the doors, but knowing that I would strongly encourage oil-based. I do have little children who are not careful, and my youngest likes to put his open palm on everything. I am a Windex-with-microfiber addict -- that ammonia cleans everything!

I wanted the plainest, truest black possible because that's what makes sense in my home, as the green-based black makes perfect sense in kswl's lovely home. Would love to see pictures of your before / after!

    Bookmark   February 24, 2012 at 10:30AM
Thank you for reporting this comment. Undo
kswl2

It's amazing how much interest we all have in this topic!
I wanted to contribute that we are priming our doors with a gray primer, also from SW, followed by two coats of satin greenblack. We have six more doors primed and they should be painted by the end of the day and will post pictures.

    Bookmark   February 24, 2012 at 10:42AM
Thank you for reporting this comment. Undo
cat_mom

Not doors, but we used BM's regular black mixed up in Aura matte finish on our brick wall/FP in our FR. We had the primer tinted grey.

    Bookmark   February 24, 2012 at 12:27PM
Thank you for reporting this comment. Undo
olivesmom

I'm not 100% sure yet, but I think I might go with "Francesca" by Martha Stewart paint (matched in Behr ultra). Francesca reads a dark black, yet still soft. I tried "cracked pepper" by Behr first and it was way too gray. I might try "black suede" by Behr, though I'm starting to get tired of all the painting going on.

I'm going with a satin finish on the doors. I think a gloss would give too much of a formal or glamorous look for the modern cottage style I am trying to impart.

    Bookmark   February 24, 2012 at 2:38PM
Thank you for reporting this comment. Undo
kayec28

I painted my interior doors BM Iron Mountain, semi-gloss. It's a very dark gray but it reads as black. I love it. Can't remember if my painter primed the doors first.

Here is a link that might be useful:

    Bookmark   February 24, 2012 at 10:54PM
Thank you for reporting this comment. Undo
kswl2

Update on our door paint-- after priming in gray and using satin paint over, we've decided to go back with semigloss. The satin was fine for the doors at the entry, where there is a lot of natural light, but we have a hallway with five doors opening on it and the satin paint just sucks all the light out of the area. So on Monday we are reprinting these seven doors in semi gloss, then will go after the other twelve doors on this level. I am hoping it won't present a problem with the high gloss trim, but as Roseanne Rosannadanna used to say, "it's always something."

    Bookmark   February 26, 2012 at 9:48AM
Thank you for reporting this comment. Undo
trinityklm

I used BM blacktop in satin. I adore it!

I first tried a high gloss alkyd paint but it was like a black hole and I didn't like the glossiness reflecting light so brightly. Think black patent leather shoes.

Blacktop is a deep, but soft black. I wish I'd painted my front door black years ago!

Here is a link that might be useful: BM Blacktop

    Bookmark   March 19, 2012 at 5:39PM
Thank you for reporting this comment. Undo
mtnrdredux_gw

Our old house was brick, 100+ yrs old. We wanted an "old black" for the front door that felt historic. We found SW Inkwell a common choice in historic districts, and liked it very much.

    Bookmark   March 19, 2012 at 9:54PM
Thank you for reporting this comment. Undo
likewhatyoudo

SW Tricorn Black # 6258 - Sherwin Williams Resilience Exterior Acrylic Latex Satin used on the interior and exterior of the our entry door. It has a sheen to it but is not shiny looks very nice, 4 of my friends have now painted their doors the same color!

    Bookmark   March 22, 2012 at 12:16AM
Thank you for reporting this comment. Undo
caminnc

Gorgeous entry rtwilliams, thanks for sharing!

    Bookmark   March 22, 2012 at 7:09AM
Thank you for reporting this comment. Undo
kswl2

Rhwilliams, your front door is outstanding! Every time I see another black door I am newly amazed at what a difference it makes. Beautiful door, beautiful house!

    Bookmark   March 22, 2012 at 8:28AM
Thank you for reporting this comment. Undo
boystown

RHwilliams: Your front door looks amazing. Also like you interior wall color. Would you mind sharing the color and brand?? Thanks

    Bookmark   March 22, 2012 at 9:29AM
Thank you for reporting this comment. Undo
likewhatyoudo

gagesgranny - the interior on the whole house is SW #7533 Khaki Shade the only room not painted this color is the laundry/mudroom it is one shade lighter SW Urban Putty #7532. The Painters used SW ProMar 200 ZERO-VOC interior Latex Egg-shell, it has a nice sheen to it but not shiny.

KSWL - thanks! I love the black door, we get lots of compliments on it.

    Bookmark   March 22, 2012 at 11:12AM
Sign Up to comment
More Discussions
Dining Room Lighting - Scale
I am in the process of remodeling my new town home....
Alex Brummitt
Red / burgundy accent wall?
Hi all! Would love your opinions on this ! My husband...
eesmerelda
where to buy a high quality leather recliner
We need to replace our queen ann, high leg recliner....
Lynn Owens
F&B to BM color closest matches
If F&B is not near you but BM is....
the_foxes_pad
Help me find a powder room paint color
My painter is here fixing another problem (sheetrock,...
tfitz1006
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™