Adding shelves to tall, narrow cabinet.

mwhiddenMay 24, 2013

I have a _completed_, built-in mudroom seat with surrounding cabinets and cubbies, very _similar_ in construction to the image below. The tall, narrow cabinet at the end has a door on it.

The sides are birch-veneer plywood about 13/16" thick.

The cabinet is 16" wide, 17" deep, and 56" tall.

Does anyone have any suggestions about how to put some useful, attractive shelves in there?

I thought about just screwing some poplar ledgers into the plywood and placing a 16x17 board on top of that, but I'm not sure the plywood is thick enough to handle that, particularly on the right side.

There are smarter, more experienced folks on this list than me and I hope you might share your ideas.

Thanks,

Thank you for reporting this comment. Undo
graywings123

Bookcase standards, perhaps?

I have used bookcase standards in two storage areas of my house. I surface mounted them.

Here is a link that might be useful: Bookcase standards

    Bookmark   May 24, 2013 at 11:04AM
Thank you for reporting this comment. Undo
camlan

Your plywood is nearly an inch thick. That would stand up to small shelves easily.

But I really like graywings' idea. That would give you adjustable shelving, so you can change the shelves as your storage needs change.

    Bookmark   May 24, 2013 at 11:42AM
Thank you for reporting this comment. Undo
mwhidden

Bookcase standards: seems like a perfect solution. Thank you, both graywings and camlan.

    Bookmark   May 24, 2013 at 2:32PM
Thank you for reporting this comment. Undo
talley_sue_nyc

I like these--the ultimate in adjustability. AND you can get drawer slides that will work with them, so you can add pullouts easily.

These are the flat strips with slots in them every 1/2" or 3/4".

You can get special drawer slides that let you install drawers. I think they're only 3/4 extension, which is a bummer, but it might make it easier to get to stuff in that deep, skinny cabinet.

And it looks like this particular set might be too deep for the cabinet you have, but you might be able to find something a bit smaller.

Especially w/ the link below--there's a large set of Accuride slides that will work with the slots.

Often these slotted standards are installed in a groove that's cut into the wood, but you can absolutely simply mount them to the surface. Esp. w/ the drawer slides, you'd lose a bit horizontally.

But one reason I like these is that the pegs are very slim so you don't lose space the way you do w/ the triangular shaped drawer brackets.

Here is a link that might be useful: shelf support/drawer slide kit

    Bookmark   May 26, 2013 at 11:40PM
Thank you for reporting this comment. Undo
talley_sue_nyc

You can also get nail-in shelf supports.

They're surprisingly strong. You'd have to get out the level and the yardstick but it would be pretty simple. Probably a lot less work--no drilling, etc. Just find the 4 spots and nail them in place. If you were worried, you could do three across each side.

Amazon sells them, as do many other places; do a Google search on "nail-in shelf supports." They come in brown, white, and metal.

    Bookmark   May 26, 2013 at 11:44PM
Thank you for reporting this comment. Undo
talley_sue_nyc

You might also consider something other than shelves.

There's the semi-classic hooks for jackets and umbrellas.

But there's also pegboard on sides and back, which would let you put hooks, little shelves, and even little baskets in different places, and you can move them around.

http://tinyurl.com/PegboardBasketSet

It depends, sort of, on what sorts of items you want to store in there.

    Bookmark   May 27, 2013 at 11:20PM
Thank you for reporting this comment. Undo
mwhidden

Thank you, tally_sue_nyc, for the great ideas and photos, too.

    Bookmark   May 29, 2013 at 9:17AM
Thank you for reporting this comment. Undo
talley_sue_nyc

Oh, one other thought: narrow, deep spaces are hard to use; you end up w/ lots of stuff shoved to the back. (ask me how I know)

You might look into getting pull-out shelves/drawers.

There's a company called Shelves That Slide (shelvesthatslide.com) that makes them in custom sizes and has really great directions for installing them yourself.

But I'd suggest that you take a deep breath and **spend the extra money** to get full-extension slides. The functionality difference is absolutely worth $20.

Without sides, these shelves run about $35. Add in full-extension slides for $17, and it's about $60.

If you decide you want drawer sides, it'll be more money, of course.

The site has some preset sizes, but you might be able to get them to make some custom sizes if you need them.

Here is a link that might be useful: the selection at ShelvesThatSlide.com

    Bookmark   May 29, 2013 at 1:27PM
Sign Up to comment
More Discussions
Are Lazy Susans useless or is it just me?
I'm in the process of revamping underutilized areas...
Mmmbeeer
What to do with hundreds of CDs
I have nice storage boxes filled with hundreds of CDs...
janeway452
Missing the Garden Web Already
I feel betrayed by the sale of the Garden Web to Houzz....
gardenwebcupofkindness
Get rid of cookbooks, and cook more?
About a year ago, I got rid of most of my cookbooks...
quasifish
Are there lateral file cabinet organizers?
I have a new lovely two drawer lateral file cabinet...
janeway452
Sponsored Products
Carlton Birch Sable Dark Stained Wood Shaker Kitchen Cabinet Sample
CliqStudios Cabinets
24 Inch Glass Bathroom Shelf Made in Brass
TheBathOutlet
Globe Electric Under Cabinet Lighting 14 in. Under Cabinet Slim LED White Light
$79.00 | Home Depot
'Ride the Wind' Figurine
$14.99 | zulily
Design Element Bathroom Malibu 60 in. Double Vanity in White with Tempered
Home Depot
Old Fashioned Walnut Large Treasure Chest Wood Trunk
Overstock.com
Afina Signature Contemporary Lighted Double Door 24W x 34H in. Recessed Medicine
Hayneedle
Marshall 2-shelf Rolling Utility Cart
Overstock.com
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™