Weld on barrel gate hinge questions

lsstNovember 20, 2008

I am trying to replace some weld on steel barrel hinges. I can not find them locally and am having trouble finding the size I need.

On the internet, I have found 5 inch, 7 inch and 7 3/4 inch barrel hinges.

How are they measured? Are the measured from weld on plate to weld on plate or are they measured from barrel to barrel?

If measured from barrel to barrel, my hinges are 6 inches. Each barrel is about 3 inches.The outside diameter of the barrel is 1 3/8 inches.

If measured from back plate to back plate it is almost 7 inches (more like 6 3/4). The back plate measures 1.5 by 3 inches by 3/8 of an inch thick.

The pin is a 3/4 inch pin and the pin is about 2 inches long. The gap between the post and gate with the barrel hinge installed is just a little over 2 inches.

Below is a pic.

Can anyone help me?

Thanks in advance!!!!!

Thank you for reporting this comment. Undo
knick

maybe try here

http://www.mcmaster.com/

search for hinge and you get a big list

    Bookmark   November 23, 2008 at 8:15AM
Thank you for reporting this comment. Undo
mike_99

That is most likely a Blacksmith Brand Large Weldable Barrel Hinge. You can get them from Triple-S Steel at 800-231-1034

    Bookmark   December 15, 2008 at 8:58PM
Sign Up to comment
More Discussions
Problem with SCALANCE X101-1 and Cisco Switch ?
I really don't know what do this happen when i try...
Jasmine01
Help - Cast Aluminum furniture cracks (Pic)
Hi, (Cross posted originally on decor forum and posting...
homey_bird
soldering copper gutters
how diy-able is it to solder a copper lap joint? I...
kitchenquest
HELP!! Patina off copper sink!
I love my copper sink with its dark patina but there...
bichonlover3
Hot patina techniques for copper countertop
Hello there, I have my heart set on a copper countertop...
adriennepratt
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™