relocating an aluminum screen room

diane4mNovember 9, 2008

I am moving from one single wide to another. My current home has a very nice and large screen room- all aluminum.I would like to relocate it to my new home.

Has anyone had any experience with this? I know that when mobile homes are moved,things like screen rooms have to be disconnected and then reattached.

A friend told me I would have to cut off the roof panels about 3-4 inches from the side of the home to take them off. This seems like alot of work.

Any feedback would be appreciated

Thank you for reporting this comment. Undo
nod702

Don't look like anyone is going to respond so you may want to check out www.mobilehomerepair.com

    Bookmark   November 13, 2008 at 6:29PM
Thank you for reporting this comment. Undo
coolvt

If you are located in a wind zone like Florida you can get in a real mess. If a permit is required it's almost certain that they won't issue you a permit to move it. They will require engineering plans to show that it will meet a certain wind level and normally the plans aren't available on older porches. Now if it can be done without a permit....

    Bookmark   November 26, 2008 at 8:11PM
Sign Up to comment
More Discussions
It is hard to find senior mobile home parks
When I check on Senior Mobile home parks most of have...
tropical_thought
mfg home factories
We are thinking about purchasing a manufactured home....
nuevomex
Are the smaller single wides cheaper than larger?
I would like to eventually get a PINE GROVE single...
poaky1
Moving an old Windsor (70's) single wide SAFE?
A friend of mine has a 1970 ish Windsor 14X 70 or 12...
poaky1
Grouted Vinyl Tile & moving Mobile Home
I have recently purchased an older mobile home. It...
twosonsmama
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™