Wallpaper

kimmapleJanuary 28, 2010

We live in a manufactured home (only 4 yrs old) and We haven't painted (my husband doesn't want to) but I am wondering how you repair the wallpaper like stuff that is on the walls, the wall board that came with the house.

I had something stuck to the wall and went to take it off and some of that wallpaper like stuff, peeled off in about 3 spots and now I see brown that is under that. Is there a way to fix it without painting since he doesn't want to?

Thank you for reporting this comment. Undo
forboystoo

I don't know what kind of finish you have on your walls.......
Mine is that orange peel look ...I changed out a light fixture which left a big round circle ....
I sanded lightly then used a can of spray texture over that spot....Let dry a day then put yp new fixture ...Didn't paint...Can't tell....

Here is a link that might be useful: http://www.homedepot.com/h_d1/N-5yc1vZ1xr5/R-100684591/h_d2/ProductDisplay?langId=-1&storeId=10051&catalogId=10053

    Bookmark   January 29, 2010 at 10:10AM
Thank you for reporting this comment. Undo
pris

Are you talking about sheetrock? Do you have a patterned wallpaper or are you talking about painted sheetrock? If it's painted sheetrock, get some "mud" and repair the tears in the sheetrock paper. Ask the salesman at the box store what you need to to use to apply the mud and how to do it. Match the existing paint color and paint over the patches after the mud dries. You might be able to use spackle but it would depend on the size tears you are working with. There again, talk to the salesman. You can show him the approximate size and be able to tell him exactly what type wallboard you are working with. I suspect the minimum supplies you will need will be mud, mud knife, sandpaper and paint. Take a small piece of the finished paper showing the color so they can match it.

    Bookmark   January 29, 2010 at 12:35PM
Thank you for reporting this comment. Undo
forboystoo

Can you post a picture ??

    Bookmark   January 29, 2010 at 12:42PM
Thank you for reporting this comment. Undo
brnincalif

I just bought a 1990 dw and am planning on remodeling and am SOOOOOOOOOO glad I found this site! I used to work in a modular home plant and saw the construction process step-by-step from about 1996 till 2000. At that facility the wallboard was vinyl covered gypsum.I have yet to close on my place. When I do I will have to inspect and see what mine are made of.

    Bookmark   March 7, 2010 at 8:50AM
Thank you for reporting this comment. Undo
driz

Thats the trouble with trailer walls, doors ect. Everything is non standard, usually not level and expensive if you can find it at all. One thing to keep in mind if you decide to do a paint job on those type walls is to scuff sand lightly if they are that shiny texture they often use. If you paint the walls and they start to peel you will pay hell to get it off again. There may be paints that will stick to that vinylized finish but just make SURE they will before you do the job whereas scuffing a bit with 220 sandpaper will surely work

    Bookmark   March 19, 2010 at 2:55AM
Thank you for reporting this comment. Undo
amandasgramma

My girlfriend has a Manuf home that's over 20 yrs old. She has painted, re-painted, and painted again over those 20 yrs. The walls had a wall paneling and a weird wallpapered paneling. She did as suggested above...she sanded lightly, primed and painted. She even put in chair railing and textured the upper portion!!!! We've put a front door on our house -- one from Lowes. It's not a standard doorway size...so DH CUT the doorway and the door fit perfectly!! you can do ANYTHING you want to a manuf. home...just get in and work it until it works!!!

    Bookmark   April 13, 2010 at 11:46PM
Thank you for reporting this comment. Undo
Shades_of_idaho

"you can do ANYTHING you want to a manuf. home...just get in and work it until it works!!!"

Really like your attitude. We put a non opening window in wall between laundry and guest bath to let light into guest bath.Ran into a vent pipe. Just had to re-rout it around the window and back to the vent on top.

Just get in and work until it works. I like that.

Chris

    Bookmark   April 19, 2010 at 8:32AM
Sign Up to comment
More Discussions
price over factory invoice in Calif.
Any info on approximate price should pay over the factory...
peggy1595
Just bought double wide office trailer
Greetings All, I just bought a doublewide office trailer...
RobGT90
Marlett 1997
I have a Marlett as a rental in Idaho. I haven't had...
cocolallakids
Heat Pumps
Is your New manufactured home Energy Star certified...
PVHIII
looking for company that builds modern mobile home for 100$ per sq/ft
would like to build a modern mobile home, around 1300...
golfgo
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™