Fisher Paykel washer GW512

omomaidDecember 13, 2013

Hi. I am from Australia and my 5 year old machine is not functioning properly since yesterday 12 Dec. After the wash function and having pumped out the water, machine does not rinse, although buttons are lit up. The lid locks and then spins eventually stopping. The lights remain on. Tried using the options to reset the rinse. No change.
Anyone on the forum using a GW512 experiencing similar problems?'

Thank you for reporting this comment. Undo
dadoes

GW512 is a Phase 6 machine.

The wash water drains fully?

No fault code and beeping occurs? You may have to let the malfunction continue for 10 to 15 mins for the fault to trigger.

Is the cold water valve perhaps not working? Rinses are cold.

Check if there is a fault code recorded:
-- Power off, press and hold Wash Temp Down, press Power at the same time. Two beeps and the panel turns on. Release the buttons.
-- Press Spin Speed Up and/or Down repeatedly as needed until both the Hold and Slow spin lights are on.
-- The eight Wash Progress lights indicate the fault code. Which are lit, in order from left to right, 1st, 2nd, 3rd, etc.?
-- Press Power to exit diagnostics.

    Bookmark   December 13, 2013 at 10:00AM
Sign Up to comment
More Discussions
Do you put powder detergent in dispenser in front loader?
I finally finished the big bottle of liquid detergent...
marti8a
The perfect appliance? (survey)
Hi everyone! Whether for kitchen, laundry appliances...
hainnovation
Removing ink on silk?
Anyone knows how to remove ink on silk. Much appreciated....
yugoslava
Speed Queen Front Load AFN50 Washer Review - Long Post
I have been lurking here for a while as one of many...
sandiego_steve
Vibration reduction in compact washers - Whirlpool vs. Asko?
We recently moved into a new house and are considering...
mannyzen76
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™