Reclaimer 90, short cycling?

lexisdad1201November 10, 2013

I have a Reclaimer 90, 90% efficient furnace, that is experiencing a few problems. This is a new to me install also. when commanded to come on by the thermostat, the exhaust blower comes on for at least 2-3 minutes before the burners come on. Once the burners come on, the temp limit switch located on the unit rises and then shuts the burner off due to the temp getting too high. As soon as the temp drops, the burners kick back on. The blower stays on the whole time and the air never blows cold, but the temp within the house doesn't rise above 68 degrees due to the constant cycling on and off. Please let me know if you have any ideas. Thanks

Thank you for reporting this comment. Undo

The limit switch is tripping for a reason. It could be a bad switch, but it also could be tripping because the furnace is over heating. You should have the furnace inspected by a tech you trust.

    Bookmark   November 10, 2013 at 10:01PM
Sign Up to comment
More Discussions
Baseboard heater thermostats
We are looking to install (2) 120v baseboard heaters...
Rheem Econet AC
Does anyone know when the new Rheem econet Ac units...
2 Stage vs 1 Stage
I am trying to decide what HVAC replacement system...
Heat pump choices for first timer. Advice??
Hello, First post, great place you all have here. We...
New Mini Split Designs for 2015
I, and I am sure others, would love to hear what is...
© 2015 Houzz Inc. Houzz® The new way to design your home™