Heat Pump Return Duct

HondaracerMay 4, 2011

I have a 4 ton heat pump(Goodman #GPH1348H12A) set up in a 24x56 (1344 SQ FT) mobile home. I have two 16" return ducts that tie into one main 16" return line to the unit (Flex hose). The Filter size at each is 14x20x1. I have two 14" (Flex) lines that tie into each side of the mobile home's rigid ducts (One single long line). I have had a problem needing to charge the A/C each summer and a tech has told me it is due to the main return line needing to be 20" with both 16"s joining to it. Also the vents need to be 20x20x1. Are the 16" returns okay or do I need to plan a replacement project?

Thank you for reporting this comment. Undo

Good grief the FIRST and only thing you need to be concerned with ( yes I know this is a old thread/posts but I have to respond to this ) is what in the world is a 4 ton doing in a 1300 sq ft double wide???????????? If you dont have moisture problems your house must be blessed by god himself. That unit is ENTIRELY too large for your home.

    Bookmark   November 21, 2011 at 9:44PM
Sign Up to comment
More Discussions
auxiliary heat vs. emergency heat
Greetings, I have a Bryan Evoltion Control heat pump...
Propane furnace
I am considering replacing propane furnace & A/C...
Navian condensing combi, good or bad?
Hi, I am looking into converting from oil to gas and...
Any Reviews/Feedback on Daikin HVAC (Dallas)
Anyone install a Daikin HVAC system yet? We are in...
Need help choosing an efficient HRV Air Exchanger
Hi, My house as a total area of 2300 square feet (1150*x)....
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™