Need help with HVAC quote

austintxacApril 25, 2013

Looks like I'm not going to be getting the heat strips in the attic for the Heat Pump so I'm going with a furnance. Do to the fact that I would need to upgrade my breaker box. So the plan is to replace the 13 year old A/C with a Heat Pump and have a 80% furnance installed in the attic with a fresh air intake and exhaust pipe. The house was built in 2000 and is 1300 square feet and is in Austin Tx. 100+ summers with a couple of days a year at 32 degrees. So I need more cooling then heating.

Does anyone know anything about this equipment and if the price looks right. Is model FA3648, the fresh air and exhaust pipe, I canâÂÂt find anything about it on the net. I need the exhaust pushed out, because IâÂÂm having the attic spray foamed after the heat pump and everything is installed. So I need that taken care of, the installer also said that he would be installing a carbon monoxide detector. However I donâÂÂt see that on the big I posted below.

Model: FA3648, FAN INDUCED FRESH AIR 36-48 (4 FAN ASSEMBLY) Knockouts
std,FHP Air
Model: N8MSN0451408A, 80%, 45K, sgl-stg, MP, 2t clg
Model: EDM4X24BA, Cased, 2t, MP
Model: NXH524GKA, COND-HP 15S, 2t R410A GRD, 15 SEER ENTRY HP-R410A
Model: P4741035, Digital, 5/2 Prog, 1H/1C (Sgl stage HP compatible), no auxil heat cont
Total price with install is $5916.94
Thank you very must for your help.

Thank you for reporting this comment. Undo
tigerdunes

What brand?

Heil? ICP?

Post back...

IMO

    Bookmark   April 25, 2013 at 5:44PM
Thank you for reporting this comment. Undo
austintxac

Sorry about that, it's Kenmore products.So it's ICP. Do you need any other information? Thank you.

    Bookmark   April 26, 2013 at 4:27PM
Thank you for reporting this comment. Undo
Tinmantu

Ran the numbers in google and all I could find is that the coil and furnace are 13 seer max. Why need a 15 seer HP? Also you need a stat or fossil fuel kit to switch over on demand. Looks mismatched to me, with the limited info I could find.

    Bookmark   April 26, 2013 at 6:35PM
Thank you for reporting this comment. Undo
tigerdunes

Best I can tell this is ICP Comfortmaker equipment that I suspect is builder grade entry level, even the condenser.

The furnace is most likely a close out discontinued model.

As previous post states , not likely to be an AHRI matching system.

Very shaky...

IMO

    Bookmark   April 29, 2013 at 11:35AM
Sign Up to comment
More Discussions
Advice on Attic insulation
So we just finished the second year in our house and...
w_fournier
No Fully Trained Mini Split Installers
Reading threads about mini split heat pumps I got curious...
nerdyshopper
HVAC billing question
Question for the pros...... So I had a faulty capacitor...
spe720
Honeywell th6320R Thermostat
My Honeywell TH6320R thermostat (communicating with...
zver11
Moving floor vent to toekick area
Hello. We are renovating our kitchen as well as baths...
cathy725
Sponsored Products
Bellagio Storm Blue 95-Inch Blackout Grommet Window Curtain Panel
$24.95 | Bellacor
Moonrays Path & Landscape Lights Marion-Style Outdoor Copper Low-Voltage 7-Watt
$11.97 | Home Depot
Dumpling Press - Set of Three
$5.99 | zulily
Porcelain Floor & Wall Tile: Merola Tile Building Materials Calacatta Luxe
$3.99 | Home Depot
Cobblestone Rug 8' x 11' - PURPLE
$1,099.00 | Horchow
Afina Signature Traditional Lighted Triple Door 38W x 34H in. Recessed Medicine
Hayneedle
Ava Rug 10' x 14' - SAGE
Horchow
Cirrus Ceiling Fan with Optional Light by Modern Fan Company
$368.00 | Lumens
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™