repairs on craft stove fireplace insert

spinachqueenFebruary 11, 2010

Is it possible to refit an old craft stove fireplace insert with a new blower apparatus. My friend tried for a long time to find a new blower for the insert and finally gave up and threw the blower and pipe that went into the insert away. The insert itself is still in great condition. How could she get a new blower apparatus built or purchased for it.

Thanks so much for any help! It's been a really cold winter and it would be so nice to get that insert going.

Jan

Thank you for reporting this comment. Undo
tigerdunes

queen

I would let "Google" be your friend.

You have contacted your local Craft Stove store? Surely parts are available. Get your insert's mdl number.

Here is a link that sells parts.

IMO
Good Luck!

Here is a link that might be useful: Craft Stove Parts

    Bookmark   February 15, 2010 at 6:56AM
Thank you for reporting this comment. Undo
revcone_hotmail_com

If it's the same as mine, you can purchase the whole blower assembly from Amazon. Mine had a 4C447 motor, which is no longer available, but search for the 1TDR3 replacement. The only hitch is that you can no longer use the rheostat with that new motor; you'll have to wire in an on/off switch. HTH

    Bookmark   December 13, 2010 at 10:16AM
Sign Up to comment
More Discussions
Manual J -> S ->D
JSHR: 0.81 MJ8 Tons: 3.03 SqFt/Ton: 1667 CFM/SqFt:...
Brian S
Pls tell me the best uses for Carrier Air Handler Model # FV4CNF003
Hi GW, I am stuck with a new 2012 air handler/heat...
ontariomom
What in the world is this thing? (Water furnace) And I need a new one?
Hi. So my new condo has an ancient thing I've been...
halgreene
Is 16 SEER Lennox A/C 5X better than 18 SEER Goodman?
I bought a bank repo home 2 years ago in San Diego....
davidahn
Mike_home, is this a good idea? re: thermostat
@mike_home, You wrote this back in 2012 and I just...
cindywhitall
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™