Carpet on concrete..what is proper installation?

slc2053October 17, 2008

Want to install carpeting on cement slab foundation, at grade level. We see the dri-core prouct but will add expense, extra time and labor and not sure if we need it.

Some say we need a moisture barrrier others say we do not. Is this a special pad or will the moisture barrier be something we install first, then the padding, then the carpet?

Also, must be glue the moisture barrier down to floor or can all be just laid down?

Thanks.

Thank you for reporting this comment. Undo
floorguy

Say what????? Is this in a basement or something???

Nail your tackstrip and roll out the cushion, Glue and tape the cushion and go cut your carpet, put the seams together where you can and stretch to where you can't seam just yet. Put those seams together and continue stretching, trim it in and tuck the edges and be done with it....

I have never placed a moisture barrier down when installing carpet. Your trying to over think this way too much.

    Bookmark   October 17, 2008 at 11:33PM
Thank you for reporting this comment. Undo
slc2053

No basement..this is a concrete slab foundation....at ground level...the concrete was poured 6 months ago..on some days it "sweats" which tells me there is still moisture in the concrete..I haven't done the moisture test yet (taping plastic down and giving it a day or two to see if moisture is there, but I will). Some say, like yourself, "don't worry about it" others say that you don't want that moisure soaking into you carpet pad then into your carpet..you may never see it but you don't want that trapped in your carpet and potential mold developing as a result.

Not "overthinking"....just asking a question as what most do here when they don't know the answer or are hearing conflicting advice....

    Bookmark   October 18, 2008 at 5:18PM
Thank you for reporting this comment. Undo
floorguy

Your slab sweats because it is below dew point temperature, not because the concrete is 6 months old. You have a high humidity situation, not a concrete moisture problem.

When you have a surface that is below the dew point temperature it will form condensation on that surface. Just like a cold glass on a humid day. It isn't the water in the glass condensing on the out side of the glass, it is because the outside of the glass is cool, and below dew point temperature and condensation forms on the outside of the glass. This is also the reason windows sweat, in the winter time. The window is below dew point temperature.

    Bookmark   October 18, 2008 at 7:57PM
Thank you for reporting this comment. Undo
slc2053

Makes sense...but if I do the plastic to the floor test, and moisture forms ..then do I have a moisture problem? If so, you're still saying it's ok to put carpet padding directly on it?

    Bookmark   October 18, 2008 at 8:29PM
Thank you for reporting this comment. Undo
floorguy

The mat test can be skewed because of high humidity. If you want a definitive moisture test, drill a hole ½ as deep as the slab is thick and insert a humidity probe. above 75% and you have a concrete moisture issue, but I still would not cover it with a moisture barrier, as carpet and padding are able to breath.

Stretch in Carpet is not effected by high concrete moisture vapors, unlike something that is directly bonded, with adhesives. It is the adhesives or wood flooring that are effected by high concrete vapor emissions.

    Bookmark   October 19, 2008 at 10:17AM
Thank you for reporting this comment. Undo
mnnie

Hello. No, you don't put a moisture barrier down first. I was told that this could lead to a mold problem between it and the concrete. I looked at Dri-core, and finaly decided against it too because it raised my floor 1" which meant I had to raise a couple doors. Too much work and money! Yes, you can put the pad directly on the concrete. I just had this done. I used a very heavy rubber pad, and I was pleased that it has done a good job of insulating the cold concrete floor.
I hope this helps!

    Bookmark   October 21, 2008 at 9:39AM
Thank you for reporting this comment. Undo
jbranch

I would not use rubber pad in a moisture prone area because rubber pad is not really rubber. It contains a lot of fillers that won't like the moisture. I am sure that floorguy knows what he is talking about, but I work for a carpet mill and in the situation where you need to file a claim for a quality issue with the carpet or the pad, the moisture could void your warranty (not real sure how much moisture you are talking about). I would recommend fixing the moisture problem then put down the carpet and pad. Wouldn't moisture lead to mold? With all the bad stuff out there about mold, I would fix the moisture for that reason alone.

    Bookmark   November 11, 2008 at 9:04PM
Sign Up to comment
More Discussions
What I Learned About Installing Engineered Floors
We just finished installing engineered flooring over...
francesca_sf
Best flooring for dog who doesn't 'hold it'
Hello Everyone- I am moving into a new house. The house...
krylander
Tigerwood Flooring - if you have it would you do it again
We are considering putting in Tigerwood flooring. We...
snowcamp
Kentwood Hardwood Flooring
Has anyone installed wood flooring from Kentwood? If...
MichelleDT
Need advice. Subway tile on uneven kneewall
So I was kinda pissed off when I walked into my bathroom...
Michael Coates
© 2015 Houzz Inc. Houzz® The new way to design your home™