Heat pump output normal?

carl333February 5, 2012

Hi, I have a Lennox XP17 2.5 Tand installed a year ago. Just wondering in my temperature output at the registers is just about normal.

With heat pump running and no heat strips engaged, I am receivng a temp of 80 degrees at the registers.


house temp: 68F

outside air temp:14F

Is 80 that I am receiving at the registers normal or am I below what it should be??


Thank you for reporting this comment. Undo


Your thermostat is able to maintain it's setting at 68 degrees fah at outside temp of 14 degrees fah? And without aux Heat strips engaged?

I assume the heat strip has been locked out?

Yes, I would say an 80 deg supply temp with those conditions are entirely normal.


    Bookmark   February 5, 2012 at 2:06PM
Thank you for reporting this comment. Undo

Actually souunds pretty good to me.

    Bookmark   February 6, 2012 at 7:33PM
Sign Up to comment
More Discussions
Who do I call about a whole-house fan?
I'd like a whole house fan. This might be a DIY project,...
Thoughts on proposed HVAC system?
To start: my house is two-level (main plus upper)...
Tampa area, advice on AC replacement
Hello, bought a house with a 31 year old Trane Heat...
Honeywell th6320R Thermostat
My Honeywell TH6320R thermostat (communicating with...
No Fully Trained Mini Split Installers
Reading threads about mini split heat pumps I got curious...
Sponsored Products
Freejack LED Veryon 16 Deg 30K 90CRI
Possini Euro Ashby Black Cone LED Mini Pendant Light
Euro Style Lighting
Hinkley Luna 4 1/2" Wide Bronze LED Step Light
$89.00 | Lamps Plus
Couristan Anatolia Antique Kashan Cream-Red Oriental Rug Multicolor - 2067/0009-
$32.00 | Hayneedle
Orlo Set of Two Pillowcases
$109.50 | FRONTGATE
15773AZT Louver Kichler LED Brick Light Bronze Finish
Radiax 3000K 60-Degree 3-Watt LED Beach Wide Flood Light
Lamps Plus
George Kovacs Round Head LED Bronze Swing Arm Wall Lamp
Euro Style Lighting
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™