gaps in coating on newly finished floors

uberdeepSeptember 13, 2012

HI, I just had my floors refinished in my new apartment.

I saw the floor while they were finishing it and it was still wet but it looked good so I paid the contractor then.

Then while moving in about 3 days later, I noticed there were a lot of places where there are gaps in the coating, see the attached image.

I'm not sure what to tell the contractor now. There are gaps like this on around 25% of the floor? It's hard to tell since I already had all my stuff moved in. Is this the kind of thing that can be fixed in small areas or am I going to have to move all my stuff out if they're going to fix it?

And can anyone give me information about what it looks like happened here? Just so I can be a little bit more knowledgable when talking to the contractor about it? Thanks.

Thank you for reporting this comment. Undo

This appears to be improper adhesion of the coat.
This looks like a case of the floor guys not taking proper steps to ensure proper adhesion of the urethane.

Looks like they used a water bourne product?

Did they sand and stain the floors?
Or did thry just come in and do a buff n coat?

Did you clean the floors at anytime before this last coat was applied?

If they sanded and stained the floors without you touching the floors its their fault.

If they did just a buff n coat its still their fault for not properly prepping the floor correctly.

If this bubbling is just isolated to one or two spots they can be addressed individually.

However if its everywhere. The entire floor needs to be addressed.

Note for future reference NEVER PAY until you have thoroughly inspected the final product.

Also a tip. If your floor guy refuses to do anything
Go to and find a certified floor inspector to look at the floor. That will be your lifeline if you need to take your flooring contractor to court.

    Bookmark   September 13, 2012 at 9:45PM
Thank you for reporting this comment. Undo

Wow! What a disaster! Yes, we need more particulars, but regardless the result is certainly unacceptable.

You have some kind of peel. You have dirt in the finish...just a real mess.

    Bookmark   September 15, 2012 at 2:54PM
Thank you for reporting this comment. Undo
Chemocurl zn5b/6a Indiana

I read your post earlier, but didn't have anything to add, other than just to say it sure looked like a mess...sorry.

I just read a post over at Home Decorating with pics of newly refinished 60 year old hardwood floors part of which had been badly stained. Hers turned out beautiful. See link below.

Hopefully you will be able to get someone to get yours looking as nice as hers.

I saw the floor while they were finishing it and it was still wet but it looked good so I paid the contractor then.
Did they only apply one coat? It sounds like someone needs to keep an eye on them that knows how to do it right.
Perhaps someone here can tell you what steps they 'should have taken' in order for it to be done right.

I was reading some on line and it sounds like 3 (or more) coats might be needed with some sanding between the coats.

How-to Polyurethane a Floor

I agree with Glenn above. It looks like there is dirt in the finish, or that maybe they even rolled it on with a fuzzy roller that gave off fuzz or something.

Good luck with getting it looking nice.


Here is a link that might be useful: First project complete: refinished floors

    Bookmark   September 16, 2012 at 9:11PM
Sign Up to comment
More Discussions
Any experience with BellaCera hardwood flooring and/or hickory wood?
We fell in love with a hickory hardwood in their line,...
Where can I find some replacement Haddon Hall parquet tiles?
I've been searching the Internets for a particular...
why is everyone pushing water based poly?
Everyone that I have gotten estimates for is pricing...
Do your Karndean floors look like this?
I'm going to be posting pictures shortly to let you...
Engineered hardwood floor help needed
We are going to be selling our home and currently are...
Sponsored Products
Florence Knoll Style Loveseat-Dark Grey - Cashmere Wool
IFN Modern
Lime Green Rochelle Swivel Armless Bar Stool
Zuri Furniture
Moooi | Double Shade Floor Lamp
$903.00 | YLighting
La Vista Rug 9' x 12' - CREAM
$6,299.00 | Horchow
Poise Oil-Rubbed Bronze Tri-Leg Floor Lamp with Tray Table
Lamps Plus
Cala Floor Lamp by Marset
$1,533.00 | Lumens
Silver Kemonte Lamp
$283.80 | Bellacor
Urban Chic Black and White Floor Lamp
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™