Garage Door Opener -Keyless Entry Pad Programming-

maandinoDecember 3, 2007

RE: CRAFTSMAN GARAGE DOOR OPENER MODEL 139.53985D

Greetings:

I am in the process of programming a new "Keyless Entry Pad"

for above reference opener. But, the "learn indicator light" will stay glow for about a minute, instead of thirty seconds as indicated in the owners manual instructions. I entered the 4-digit PIN after the light stop and the motor lights do not blink; for some reason the PIN is not learned. remotes".

Also, I followed the programming instructions with the "Premium Control Console", without success.I have no problems with the "hand held remotes'.

Your assistance will be much appreciated. THANKS...

Thank you for reporting this comment. Undo
don_1_2006

Try this. Press and immediately release the smart/learn button and then walk over and key in your 4 digit PIN. This normally works. There is a chance you got a bad keypad.

    Bookmark   December 4, 2007 at 12:52PM
Thank you for reporting this comment. Undo
maandino

Greetings:

Thanks to Don, for your input to my inquiry. I changed the Keyless Entry Pad and "bingo" the garage door is now back in operation.

Thanks again and Merry Christmas to all of you..

    Bookmark   December 7, 2007 at 4:17PM
Sign Up to comment
More Discussions
Light on my garage door opener won't turn off
The light on my old Genie Medallion Series garage door...
liviey
Garage Door Torsion Spring
Have you noticed that local HomeDepot/Lowes do not...
mister_h
Chamberlain Garage Door Opener receiver problem
For the past 5 years, my Chamberlain Whisper Drive...
clarence_locke
New construction.. Trying to decide on what flooring for garage..
Ok.. So we are building a brand new house and one of...
Jason143NBPD
garage door remote opens but wont shut door
I have a 10 year old Craftsman garage door opener model...
Junky
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™