Craftman garage door opener problem

biffer48December 28, 2006

I am having problems since my son tried to open the door using the keypad. I don't know what he did, but now the remotes and key pad don't work. I unpluged the unit, cleared the memory, reset the keypad, reset the memory on both remotes, replaced the batteries on both remotes and still nothing. When I punch in the code on the key pad the buttons start to flash. I am not sure why, but I do not know what he pushed to cause this and how to clear it. Any help?

Thank you for reporting this comment. Undo
don_1_2006

I think your son is being blamed for something he couldn't have caused by using the keypad. The buttons flashing on the keypad is normal. You didn't mention the wall button. Does that work? Sounds to me like you have logic board problems.

    Bookmark   December 28, 2006 at 4:49PM
Thank you for reporting this comment. Undo
biffer48

Don, Sorry to say but my son has the ability to do anything with anything. The wall button is the only way I have to open and close the door. I can program the key pad and it will work at least once, but then it stops. How hard is it to change out to logic board?

    Bookmark   December 29, 2006 at 7:39PM
Sign Up to comment
More Discussions
Garage door won't open - even manually
Our garage door won�t open - the motor works,...
karyn
Need help diagnosing Chamberlain Garage Door Problem
Hi, Have a 1/3 Chamberlain Liftmaster that started...
koalb01
Snowblower help
I have a M t d model 317e760f118 track driven snow...
thechad1985
Need Help with My SnowBlower
I just recently bought a Craftsman 24" snow thrower,...
bdouble
Garage Door Torsion Spring
Have you noticed that local HomeDepot/Lowes do not...
mister_h
© 2015 Houzz Inc. Houzz® The new way to design your home™