Craftsman Opener 139.53674SRT1

organic_jackDecember 4, 2006

My keyless entry does not work. I cannot find an instruction manual. I am trying to program the keyless entry unit. After I push the button on the back of my main drive, I then enter a new code and hit enter on the keyless unit. The keyless unit then blinks on and off numerous times. But, the code is not accepted. What am I doing wrong? Thanks!!

Thank you for reporting this comment. Undo
Don_

Sounds like you are doing everything right. Make sure you press and immediately release the button on the back of your opener and then do what you are doing. Has this keypad ever worked with your opener or did you just purchase it? If you just purchased it you probably got the wrong one.

    Bookmark   December 4, 2006 at 2:37PM
Thank you for reporting this comment. Undo
doorguy06

Sometimes, only when you are programming it, you have to push the numbers like you are trying to push them through the back of the keypad. Try pushing the numbers a little harder and hold them in for about a second on all 4 and then the enter button.

    Bookmark   December 4, 2006 at 7:31PM
Sign Up to comment
More Discussions
What's the Lowdown on Garage Door Brands??
I have read some prior posts on steel garage door brands...
Xena99
Light on my garage door opener won't turn off
The light on my old Genie Medallion Series garage door...
liviey
Chamberlain Garage Door Opener receiver problem
For the past 5 years, my Chamberlain Whisper Drive...
clarence_locke
Craftsman 3/4 HP Garage Door Opener w/Extension
I just installed a 9.18450 opener with a track extension...
brian_nb
Garage Door Torsion Spring
Have you noticed that local HomeDepot/Lowes do not...
mister_h
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™