Craftsman 1/2 HP Opener Not Working

pjv103November 27, 2006

This afternoon our garage door opener stoped working. It was used multiple times earlier today. The unit is about 9-1/2 years old. Today is a sunny day and we haven't had bad weather in five days. The low voltage green LED lights are 'on' at the wall transmitter and two overhead door sensors. When you push the wall transmitter button, all you here is a click. The amber light at the 'learn' button flashes five times and then stops... then flashes five times again. I've read a handful of other similar problems and suggestions and nothing seems to work. The door trolley is not near the bolt in front of the motor unit and I tried turning off the breaker to the garage but I still have the same problem. The two 60W bulbs also do not work. It appears the unit is receiving 120v power, converting it to 24v and sending it out to the wall transmitter and sensors. However, if it takes 120v (motor and light bulbs), it's not working. Is the unit terminal or can it be repaired? Any advice will be appreciated., Thanks in advance.

Thank you for reporting this comment. Undo
doorguy06

Sounds like the motor is locked up. Probably best just to replace whole unit.

    Bookmark   November 30, 2006 at 1:45PM
Sign Up to comment
More Discussions
Need help diagnosing Chamberlain Garage Door Problem
Hi, Have a 1/3 Chamberlain Liftmaster that started...
koalb01
Chamberlain Garage Door Opener receiver problem
For the past 5 years, my Chamberlain Whisper Drive...
clarence_locke
What's the Lowdown on Garage Door Brands??
I have read some prior posts on steel garage door brands...
Xena99
New construction.. Trying to decide on what flooring for garage..
Ok.. So we are building a brand new house and one of...
Jason143NBPD
Garage Door Torsion Spring
Have you noticed that local HomeDepot/Lowes do not...
mister_h
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™