Sears Garage Remote and Keypad

les1November 11, 2009

I have a one piece double garage door with a Sears garage door opener. It came with 2 remotes and an inside open/close button. I then installed a keypad outside and the remotes ceased working. I have reprogramed both the keypad and the remotes but can only get one or the other to work not both.

Any idea's

Thank you for reporting this comment. Undo
don_1_2006

You got the wrong keypad for your opener. Take the model number off the motor unit. It is on the opposite end of where all those white wires go. The keypad must be for that model opener or you will have that problem.

    Bookmark   November 11, 2009 at 5:50PM
Sign Up to comment
More Discussions
Sun shines on sensor....
...and garage door will not stay down! Anyone have...
phoggie
Garage door won't open - even manually
Our garage door won�t open - the motor works,...
karyn
Craftsman Garage door openers old dipswitch technology
My garage door motors still work great- 30 years old....
mamasalvo
Chamberlain Garage Door Opener receiver problem
For the past 5 years, my Chamberlain Whisper Drive...
clarence_locke
Garage Door Torsion Spring
Have you noticed that local HomeDepot/Lowes do not...
mister_h
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™