can only get remote OR keyless entry to work on garage opener

lmf821October 26, 2007

I have a craftsman 139.5366srt2 and the remote stopped working. I changed the batteries and reprogrammed. I can get the remotes to work OR the keyless entry but I can not get them to work at the same time. It seems like when I program one it erases the code on the other. But they used to all work.

Any ideas?

Thank you for reporting this comment. Undo

I just started having the exact same problem yesterday. When I began, I was attempting to reprogram one hand-held remote as well as the keyless entry pad. I tried so many things I can no longer remember everything I did nor the order in which I did them. At this point, I can get either the hand-held remotes to work or the keyless entry, but not both at the same time. I read something in another post about the hand-held possibly reverting to "old technology", which appeared to mean that it would no longer support rolling codes, but only support static codes. Could this be true and could it be the source of the problem?

    Bookmark   October 27, 2007 at 1:00PM
Thank you for reporting this comment. Undo

I have the exact same problem. Had to buy a new keypad...once I programmed it the remotes were erased. I programmed the remotes and now the keypad doesn't work..

    Bookmark   October 29, 2007 at 6:10AM
Thank you for reporting this comment. Undo

Sounds like you all are having problems with a unit that has reverted to the earlier technology. The problem is finding the one that is bad. If you have 2 or more remotes that work but your keypad doesn't then I would suspect the keypad. You must make sure you get the correct keypad or you will have the same problem all over again. disney1 I think you were sold the wrong keypad.

    Bookmark   October 29, 2007 at 2:27PM
Thank you for reporting this comment. Undo

So has anyone figured it out yet? We are just using the key pad but I want to get it figured out before the snow flies.

    Bookmark   October 30, 2007 at 10:46AM
Sign Up to comment
More Discussions
Hi friends, I am looking for cabinets for my garage...
Chamberlain Garage Door Opener receiver problem
For the past 5 years, my Chamberlain Whisper Drive...
Need error codes for Craftsman 41A4315-7D.
Need error codes for Craftsman 41A4315-7D Garage Door...
Garage Door Torsion Spring
Have you noticed that local HomeDepot/Lowes do not...
Custom Wood Garage Doors
Does anyone know or have experience with wood garage...
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™