GDO problem it reverses on its own

jjuni01October 28, 2006

Hi I have a sears craftsman gdo 1/2 hp and about a week ago I replaced the gear because it was worn out but when I put everything back together the door only travels about 6 to 10 inches and reverses. Ive checked the springs there fine, Ive checked the sensors there both well lit, Ive also checked the kg down and up. I dont know what else to do, the light doesnt flash or anything the only light flashing is the little green one in the back next to the button that you program the remote. It flashes 5 times . Even trying to override the sensors by holding down the wall button wont work. Can anyone help?!

Thank you for reporting this comment. Undo
Don_

When you replaced the gear did you remove the black plastic interruptor cup and forget to replace it? It needs to be slid all the way onto the motor shaft to work properly.

    Bookmark   October 30, 2006 at 2:04PM
Thank you for reporting this comment. Undo
mcbenney

I had this problem--and the interruptor cup was indeed the culprit. Thanks.

    Bookmark   January 21, 2007 at 5:20PM
Sign Up to comment
More Discussions
Garage Door Exterior Lighting Help Please
Hello members, On the exterior, do you prefer lighting...
pippit
Chamberlain Garage Door Opener receiver problem
For the past 5 years, my Chamberlain Whisper Drive...
clarence_locke
garage door remote opens but wont shut door
I have a 10 year old Craftsman garage door opener model...
Junky
Need error codes for Craftsman 41A4315-7D.
Need error codes for Craftsman 41A4315-7D Garage Door...
don831
Unfinished Detached Carport from 1924
Hi, My house and an accompanying detached garage were...
Central_Cali369
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™