craftsman 1/2hp garage door opener

michaelmellSeptember 20, 2009

While programming a new remote, the hardwired switch stopped working. There is power to the drive unit and the remotes work.All control wire connections are good, the obstrution sensor is aligned.

Thank you for reporting this comment. Undo

I would double check the wiring to the wall control. The wires are connected to terminals 1 and 2 on the rear of the motor unit and you may have disturbed one while pressing the smart/learn button.

    Bookmark   September 21, 2009 at 10:06AM
Sign Up to comment
More Discussions
Shop vacuum
Are there any good 12 -15 amp shop vacs that have 1200-1500...
Need Help with My SnowBlower
I just recently bought a Craftsman 24" snow thrower,...
Sears GDO does not close
I've searched on the forum without any luck. My Sears...
Custom Wood Garage Doors
Does anyone know or have experience with wood garage...
Craftsman Garage Opener Clicks only and LED blinking 5 times
My 1/2 HP Model 139.53641SRT opener clicks to all my...
Sponsored Products
All Things Cedar Sycamore Potting Bench - Western Red Cedar - PB48U
$529.98 | Hayneedle
Kraus Square White Ceramic Vessel Bathroom Sink
Enigma Ceiling Fan by Fanimation Fans
$1,199.00 | Lumens
Hyloft 45 x 45 in. Ceiling Mounted Storage Rack - 625
$69.99 | Hayneedle
Excel Workbench with 2 Drawers - TSC5911
$396.99 | Hayneedle
Edenshire 18 3/4" High Brass Outdoor Wall Light
Lamps Plus
Racor Ladder Lift - LDL-1B
$49.99 | Hayneedle
BluWorld Falling Leaves Vertical Fountain - WWMVSL-RB
$795.00 | Hayneedle
© 2015 Houzz Inc. Houzz® The new way to design your home™