Sears/Craftsman garage door opener will not open.

GracieGSeptember 29, 2011

I have a Sears garage door opener 1/2 horse with keyless remote. It will not open with any of my remotes but it will SOMETIMES close with them. It also has a hard wired door opener that works all the time. It does not matter what time of day or what the temperature is they just will not work. This has been going on for some time and I have been making do with the hard wired unit.

I replaced all the batteries in the remotes. I tried reprogamming the remotes but it still does the same thing. The antenna wire is in the same position it was when the remotes were working and all connections appear to be good.

As a last resort I unplugged the unit for ten minutes and plugged it back in. Results were the same. I did not think that would work in this case but figured it was worth a try.

Thank you for reporting this comment. Undo
don_1_2006

Sounds like your receiver has quit. Hard wired wall control and keypad doesn't use it so it keeps working. Time for a new opener. That one is old and outdated anyway.

    Bookmark   September 29, 2011 at 4:20PM
Sign Up to comment
More Discussions
Snowblower help
I have a M t d model 317e760f118 track driven snow...
thechad1985
New construction.. Trying to decide on what flooring for garage..
Ok.. So we are building a brand new house and one of...
Jason143NBPD
Need error codes for Craftsman 41A4315-7D.
Need error codes for Craftsman 41A4315-7D Garage Door...
don831
Need help diagnosing Chamberlain Garage Door Problem
Hi, Have a 1/3 Chamberlain Liftmaster that started...
koalb01
Light on my garage door opener won't turn off
The light on my old Genie Medallion Series garage door...
liviey
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™