Programming an universal garage door remote

debrahmartinAugust 17, 2007

I have a garage door opener that is 13 yrs. old, and when we bought this house, we weren't given any remotes for it. I just bought a Clicker universal remote for it, and I've been trying to program it to work with our Liftmaster 1/3 hp Professional Line opener, for which we have no manual. What the remote's instructions say I should be finding on the opener is not what I'm actually finding. There are no dip switches, brand switches or smart buttons. There are three wires, and two little yellow dials that control the speed and pressure of the door. If anyone can tell me how to program the Clicker that I bought, I would greatly appreciate it.


Debrah Martin

Thank you for reporting this comment. Undo

Just to the left of where all those white wires go you should find a button. This is the smart/learn button. Press and hold the button on your new remote and then press and release the smart/learn button. You should now be programmed.

    Bookmark   August 21, 2007 at 12:42PM
Sign Up to comment
More Discussions
Unfinished Detached Carport from 1924
Hi, My house and an accompanying detached garage were...
Shop vacuum
Are there any good 12 -15 amp shop vacs that have 1200-1500...
Craftsman Garage Opener Clicks only and LED blinking 5 times
My 1/2 HP Model 139.53641SRT opener clicks to all my...
New construction.. Trying to decide on what flooring for garage..
Ok.. So we are building a brand new house and one of...
Ice in garage on mild winter days
We have a two story house with an attached 2 car garage....
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™