Programming keyless entry keypad for Craftman Garage Door Opener.

Richard9August 6, 2011

I have Craftman Garage Door Opener model 139.53914D. The battery on keyless entry pad died. I replace the 9V battery and programme the entry code and worked fine for a week and keyless entry pad stopped working.(Garage door will still open and close with wall Premium control console). I replace the battery again. Inpite of repeated tries now I am not able to programme code on keyless entry pad and not able to use keyless entry pad. Two motion sensor lights at the bottom of the door are in alignment and both lights are on.

Can anyone help me, how do I programme keyless entry pad?


Thank you for reporting this comment. Undo

Locate the smart/learn button on the rear of the motor unit near where all those white wires go. Press and immediately release this and then walk over to the keypad and key in any 4 digit code you like and press enter.

If this doesn't work your keypad has failed.

    Bookmark   August 8, 2011 at 10:16AM
Thank you for reporting this comment. Undo

I alredy tried this and still it doesn't work. I will try replacing keypad.


    Bookmark   August 9, 2011 at 11:19AM
Sign Up to comment
More Discussions
Ice in garage on mild winter days
We have a two story house with an attached 2 car garage....
Garage Door Torsion Spring
Have you noticed that local HomeDepot/Lowes do not...
Craftsman Garage door openers old dipswitch technology
My garage door motors still work great- 30 years old....
who makes a 10x8 "Carriage House" style garage door?
Perusing the websites of most of the major garage door...
New construction.. Trying to decide on what flooring for garage..
Ok.. So we are building a brand new house and one of...
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™