GDO Car Remote and Keypad

vanetteAugust 22, 2006

The battery in my GDO car remote went out this weekend. I replaced the battery and "reprogrammed" the remote using wonderful info I found on previous postings. However, after I got the remote to work my wireless keypad wouldn't work. I figured out how to "reprogram" it and got it working but then the car remote wouldn't work. How do I get the car remote and the keypad to work at the same time? The model number on my car remote is 139.53681B. The GDO is a Craftsman 1/2hp -not sure about the model number.

Thank you for reporting this comment. Undo
Don_

Sounds like your remote reverted to an earlier technology. This is what causes this kind of problem. Go to Sears and get a new remote with the same model number you listed. You should then be able to program it and your keypad.

    Bookmark   August 22, 2006 at 2:44PM
Thank you for reporting this comment. Undo
sjtulirui_yahoo_com_cn

maybe you are using a earlier fixed-code technology which uses dip switches to set the address pins of encoder and decoder ic, when you do the programming, maybe you should check your manual for dip switch addressing information.
and maybe you should check out the garage door opener remote dip switch calculator at solidremote, it will save you a lot of calculations.

Here is a link that might be useful: garage door opener remote dip switch calculator

    Bookmark   April 3, 2011 at 8:20AM
Sign Up to comment
More Discussions
Shop vacuum
Are there any good 12 -15 amp shop vacs that have 1200-1500...
randalls1
What's the Lowdown on Garage Door Brands??
I have read some prior posts on steel garage door brands...
Xena99
Snowblower help
I have a M t d model 317e760f118 track driven snow...
thechad1985
Need error codes for Craftsman 41A4315-7D.
Need error codes for Craftsman 41A4315-7D Garage Door...
don831
Need help diagnosing Chamberlain Garage Door Problem
Hi, Have a 1/3 Chamberlain Liftmaster that started...
koalb01
© 2015 Houzz Inc. Houzz® The new way to design your home™