Sears 1/2hp GDO won't close properly

calipso69August 27, 2010

I am having problems with a Sears 1/2hp garage door opener model 139.53636srt. To close it you have to hold the inside control button in until it closes all the way. I replaced the sensors, and they are both lit and appear to work fine. I also checked all control and sensor wiring for faults and correct installation. The green led on the lift unit blinks 4 times and pause, repeat. The door will not close by remote, breaking the beam with the door open will not turn on the light, and one push of the control button will not close the door. Any ideas on what I should do next? I have a really big hammer...

Thank you for reporting this comment. Undo

The blinking LED is sending the code for: Safety reversing sensors slightly misaligned (dim or flashing LED).

    Bookmark   August 27, 2010 at 5:01PM
Sign Up to comment
More Discussions
Craftsman Garage Opener Clicks only and LED blinking 5 times
My 1/2 HP Model 139.53641SRT opener clicks to all my...
Custom Wood Garage Doors
Does anyone know or have experience with wood garage...
Need Help with My SnowBlower
I just recently bought a Craftsman 24" snow thrower,...
Turning part of garage into storage/man cave/laundry
Some background in my project: 1. I need a study, so...
Unfinished Detached Carport from 1924
Hi, My house and an accompanying detached garage were...
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™