garage opener

djjuniorJuly 20, 2009

I have a craftsman 1/2hp opener(10-20yrs old) and a chambelain key pad. The key pad is not working since yesterday. I checked the opener for the learner(reset) button but it doesn't have one. It only has 0-10 little switchs. How do I reprogram the keypad??

Thank you for reporting this comment. Undo
don_1_2006

Try this: First unplug the garage door opener from the electrical outlet. Next remove the nameplate from the console that the keypad plugs into and locate the program/operate switch. Flip the switch to program. Next enter your desired four digit PIN number into the keypad. Slide the switch back to operate and plug the garage door opener back in. The keypad should be programmed.

    Bookmark   July 20, 2009 at 5:32PM
Thank you for reporting this comment. Undo
djjunior

Ok, I'll see what happens,, thanks...

    Bookmark   July 20, 2009 at 5:49PM
Thank you for reporting this comment. Undo
djjunior

I took the console(door opener switch that the keypad plugs into) off and there is no reset inside. The button is a chamberlain as well as the key pad.

    Bookmark   July 20, 2009 at 8:23PM
Thank you for reporting this comment. Undo
djjunior

Found the switch and put it on program. Unpluged the opener and set my 4 digit pin. put the switch back on and pluged in the opener but still no luck. The Key Pad was blinking when I entered the PIN and stopped blinking when I switched it back on. Any thoughts???

    Bookmark   July 21, 2009 at 5:30PM
Thank you for reporting this comment. Undo
don_1_2006

I think your keypad has bit the dust. You will find it is "no longer available" due to the age. It's time to update your opener.

    Bookmark   July 22, 2009 at 4:27PM
Sign Up to comment
More Discussions
Craftsman garage door opener problems
I am having trouble with my 3 year old Craftsman garage...
magilla_53
Cabinets
Hi friends, I am looking for cabinets for my garage...
davidnc
Chamberlain Garage Door Opener receiver problem
For the past 5 years, my Chamberlain Whisper Drive...
clarence_locke
Allister GDO not closing with remote
Having a problem with my Allister Access 3500 GDO not...
irishh7
Craftsman Garage Opener Clicks only and LED blinking 5 times
My 1/2 HP Model 139.53641SRT opener clicks to all my...
nosleep
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™