Craftsman Keyless Entry #53876 & Garage Door Openers

maryjo_maryjoJuly 7, 2008

We purchased a new Craftsman Garage Door Keyless Entry Pad since our old one died. When trying to program the keyless pad the garage door openers were interuppted so we reprogrammed the openers and now the keyless pad won't work. How do you get all three to program together? We have the instruction manual and what they tell you to do does not work.

Thank you for reporting this comment. Undo
don_1_2006

You must be sure the keypad is the correct model for your opener. Take the model number off your opener and that keypad back to where you purchased it and make sure you get the right one.

    Bookmark   July 7, 2008 at 2:17PM
Thank you for reporting this comment. Undo
maryjo_maryjo

It is the correct model, I think we are not doing something right.

    Bookmark   July 11, 2008 at 10:05AM
Sign Up to comment
More Discussions
Ice in garage on mild winter days
We have a two story house with an attached 2 car garage....
boubou64
Allister GDO not closing with remote
Having a problem with my Allister Access 3500 GDO not...
irishh7
Craftsman Garage Opener Clicks only and LED blinking 5 times
My 1/2 HP Model 139.53641SRT opener clicks to all my...
nosleep
What's the Lowdown on Garage Door Brands??
I have read some prior posts on steel garage door brands...
Xena99
garage door remote opens but wont shut door
I have a 10 year old Craftsman garage door opener model...
Junky
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™