craftsman 139.53985D garage opener lights remain on

bobbakallJune 29, 2007

The opener was installed last year in May. IT works but the lights remain on and can't be turned off nor does the time delay work. Had to unscrew the bulbs. I took off the side with the logic board. Is there a part to replace or check?

Thank you for reporting this comment. Undo
don_1_2006

I'm not sure this will work in your case but there is a function to change the length of time the light will stay on. Press and hold the light button on your wall control for 10 seconds. This toggles the various lengths of time. You may have a stuck relay on the logic board causing your problem.

    Bookmark   July 2, 2007 at 4:39PM
Thank you for reporting this comment. Undo
bobbakall

Found out the logic board is bad. Even under 2 year warrenty, cannot get replacement part without paying for service call. Part is $95 thru Sears, service call with labor is 132, and their cost for part is $130. This opener is made by chamberlain and web price is about $75 including shipping for replacement board. Was able to renew 1 year service contract for another yr since within 3 months expiration for $39. Therefore if you can use a screw driver and disconnect plugs you can do it yourself for $200 or so less than thru sears service technician!

    Bookmark   July 10, 2007 at 12:13PM
Sign Up to comment
More Discussions
Cabinets
Hi friends, I am looking for cabinets for my garage...
davidnc
Snowblower help
I have a M t d model 317e760f118 track driven snow...
thechad1985
Need Help with My SnowBlower
I just recently bought a Craftsman 24" snow thrower,...
bdouble
Chamberlain Garage Door Opener receiver problem
For the past 5 years, my Chamberlain Whisper Drive...
clarence_locke
Ice in garage on mild winter days
We have a two story house with an attached 2 car garage....
boubou64
© 2015 Houzz Inc. Houzz® The new way to design your home™