HELP - Disable 'vacation' button

stmerchaMay 21, 2008

I have an old Craftsman 139.525, and the vacation button light is on which has deactivated the remotes. Is there a special trick to turn the vacation light off? I've been in the garage for hours pushing the buttons, holding down for 10 seconds, etc. to no avail.

Any help would be greatly appreciated!

stmercha

Thank you for reporting this comment. Undo
don_1_2006

This is normally done by holding the lock button in for 3 seconds. If this doesn't work you could have a bad wall control. Try disconnecting it and if your remotes still don't work you can reprogram them. To do this, find the smart/learn button on the back of the motor unit. Then hold down the button on the remote and press and immediately release the smart/learn button. Do this for each remote.

    Bookmark   May 22, 2008 at 4:39PM
Sign Up to comment
More Discussions
Shop vacuum
Are there any good 12 -15 amp shop vacs that have 1200-1500...
randalls1
Chamberlain Garage Door Opener receiver problem
For the past 5 years, my Chamberlain Whisper Drive...
clarence_locke
Easy to use Backpack Blower Storage
I have been keeping my backpack blower on the floor...
blakeas
Sun shines on sensor....
...and garage door will not stay down! Anyone have...
phoggie
2x6 strength? How much weight will a truss in my garage hold?
I want to build an engine hoist in my garage. I found...
work.truck
© 2015 Houzz Inc. Houzz® The new way to design your home™